Search results

Do I need to increase CYA before SLAM?

The Slam info indicates that if FC level falls overnight it indicates contamination is consuming chlorine,and my test results at 10 PM showed FC at 6, but at 7 AM it down to 3. Am I just wasting time and chlorine?I believe the only source of contamination is the filter. I cleaned my filter...

I added 5 gal liquid (10%) chlorine, and the water cleared up overnight; however my test kit (taylor k2006) indicates no free chlorine. I took sample to Leslies and they show .13 ppm, and ph 8 and 1846 ppb phosphates along with .5 ppm copper. I'm attaching their 3 page report They recommend a...

Is it okay to use a 10' feed hose as the leader or is it important to buy the much more expensive leader hose? What's the difference in the two hoses? I'm in the process of overhauling my Polaris 280.

Most of what I've read about SP devices says install at the sub-panel. My equipment is connected to a breaker in my 100 amp main panel. I'd like to put an Intermatic PS 3000 in front of my timer, but my electrical knowledge is minimal. Am I correct in thinking that the SP device just sits on...

Need to replace fried 2 speed pump. Among variables, is there a consensus as to preferred brand? Jandy, Hayward, or Pentair? I'm being told that it's essential to replace the existing breakers with a specific type that's approved for the variable pump, but I see people who self installed...

I can't find a replacement motor for my Hayward Super II filter for any reasonable price. Consideering replacing the pump and motor but can't afford the cost of Hayward of Pentair so looking a a cheap alternative. Anyone have experience with this one...

My pump died, naturally on weekend, so can't get it fixed for several days while awaiting repleacment. Any thing I should do to maintain water quality while no filtration/circulation?

After repl;acing digital timer, when breaker turned back on, the motor hummed for a few seconds, then made a pop sound and emitted some smoke. I suspect the the motor is fried. Now I'm awaiting n electrican to replace my breakers which apparently also got fried. A bit mystified as to what...

My 10 year old Intermatic PE153 just died. Apparently the digital timers are not repairable, and in inquiring about repairs, I'm being told the the PE153 is not a good unit and that about 2 years is all you can expect. I need the 3 circuit timer for m y 2 speed hayward pump and the seperate...

Having installed a new motor to replace one that died, both circuits run the motor at low speed The intermattic timer wiring has not been changed and the pump comes on with either manual switch, but runs at same speed on both.

My skimmer is acting strangely. It draws water in a big rush until the level drops below the basket, then the basket fills an all is quiet for a few seconds then it repeats. This occurs only when the pump is at high speed, At low speed the skimming action is very slight but seems consistent...

Are Chlorox Xtra Blu chlorine tabs worth their higher price?

I'm thinking I have a bearing about to fail. Otherwise filter and pump are in good shape. I'm trying to find a shop to repair the motor without any luck. There was a guy in the area, but he retired. Are we just in a disposable society now? Any suggestions will be appreciated. I'm in San...

I think the lower body of my Hayward c3030 has a crack. There's a slow drip from underneath when the filter is running. I'm a bit reluctant to get another Hayward since this thing has failed, but maybe that's just the way things go. It's about 8-10 years old as I recall. Anyone have any info...

After a few weeks of trying to get CYA down so I could slam at a reasonable FC, I spoke with Cholrox people (1-800-SOS POOL). They informed me that CYA was not really a problem, that mustard algae is chlorine resistant, and suggested using XTRABLUE algaecide. Over night my algae is nearly...

Anyone have experience with this product? "Cover Free's patent pending advanced mono-layer technology offers users the ability to save water and money by decreasing evaporation. A mono-layer (one molecule thick) is formed on the water surface, while surface tension allows it to remain in place...

Why do so many people use "bleach" instead of pool chlorine? Or are you using the terms interchangeably? I've seen several comments about 121 ounce bottles of Chlorox bleach. I get full gallons of Pool chlorine at Home Depot for $3.48 (0.27/oz.)

Attached photo's of pool walls after brushing of what I believe to be mustard algae. Will these require acid wash to remove?

I've been fighting algae with shock treatment, but because my CYA is in the 120 range, it takes a lot of CL. I'd like to try the BioActive product, but I see this warning " It is important to note, that your chlorine will attack the active ingredient in Bio-Active, so make sure your chlorine is...

Every day, when I brush, I see small clouds come off the wall, leaving the stains behind. Even though FC is at 33, and Ph at 7.2 it keeps coming back. The stains are kinda scaly looking, and I suspect they will not ever go away. Also I'm uncertain about testing with the K-2006 kit: The...