Search results

My DE Filter outlet is plumbed to a pipe that exits to my street. Last time I backwashed, my chlorine level was a little high, and it burned my grass and 2 neighbors. It also leaves a bunch of DE in the street. I've never opened the Filter and manually cleaned the elements. I've lived here 3...

My backup valve seems to be blasting water constantly, causing the unit to move backwards into a corner. I haven't opened it up yet, but is this usually because the gears are stuck or is something probably broken inside?

I have a Polaris 280. The wall fitting is not the typical one from Polaris. It's some type of quick connect. Attached are 2 pictures of the inline filter that connects to the wall fitting. It's cracked and I can't figure out where to find it or who the manufacturer is.

After 22 years of owning a pool with a Hayward cartridge filter, I now own a pool with a Hayward DE3620 filter. Did my first backwash, rinse this evening. Is it just me, or is this a huge PITA? I found the manual online, which calls for 4.5lbs of DE powder. After reading horror stories, I...

I just bought a house with a pool after a 2 year stint living the apartment (no maint!) life. Before that I had a pool 22 years. The new to me pool is from the 70's. Most equipment appears fairly new. My first DE Filter. The pool hasn't been resurfaced in years. I'm just getting a very...

I just purchased a home after living the apartment life for 2 years. Before that I had a16x32 inground pool for 22 years. This pool is similar in size. It feels as if I'm starting over! Need to update the information in my signature, as it is from my old pool. First of all, the house had...

In addition to dealing with high CH levels, this morning I noticed moisture under my Polaris booster pump. Below is a picture of the leaking area. I know it is sideways but it shows up a lot better. Is this a relatively easy tear down? What parts do I need for this? My locally owned pool...

It's been quite a while since I've had any issues with my pool. Due to many issues, I've been negligent so far this year though. Attached is a picture of the deep end of my pool at night. Lot's of flakes floating on the surface. My understanding is it's scale. Otherwise, the pool is...

It's been a while since I've posted here. You guys have taught me well. The other day I noticed my Whisperflo WFE-3 pump had not been running. The breaker had tripped. I reset the breaker and the motor just hummed loudly. I'm assuming the motor is shot. 2 Questions: 1. Would the motor...

Went out to clean my C1200 cartridge filter this morning and can't open it. I can turn the knob about 8 turns before I get a loud click/thump and no more progress. I can tell something is stripped. I tried tightening it up and loosening it but at the same point I got the same result. I also...

My Polaris 280 barely moves at all. It basically sits on its front wheel with its back end up at about a 45 degree angle. I checked the wall filter screen and it is fine. The backup valve is leaking a little water all the time so I ordered a replacement, but it can't be losing enough water to...

Came home from work today to find the outlet hose from my booster pump had blown off! Lost about 12" of water from the pool. I just made it to the pool store before they closed to pick up a new connector. The clamps on the inside of the connector broke allowing the hose to blow off. You can...

We have been making our way through the forum, starting with my DIY replacement of our pump and successful shocking of our swamp. The water is as clear as ever and we passed the "3 tests" to stop the shock process several days ago. At this point, we are waiting until FC drops to the target of...

I'm continuing to post updates on my other thread but I have a quick question. We are getting close to finishing the shock process. When I get home from work, I plan to test FC and add any needed chlorine. How long do I need to wait before re-testing FC for purposes of the OCLT test? Pool...

I used the search feature and found some good info on my issue. After installing my new pump, I had a small leak from the threads. I took it apart, cleaned the threads and reinstalled using dope and tape but it still leaked. Upon close inspection, it appears there is some damage to the...

Now that our new pump is installed, it is time to get our water chemistry under control. The water is a nice shade of green, I can see the Polaris on the bottom of the shallow end but not the drain in the deep end. Mrs. Sprocket sorted out her new TF 100 kit and got the following results: FC...

When changing out my pump, I realized the booster motor did not have a bonding wire. There is a solid wire bonded to the pump motor, but the casing has so much paint and is so old it will not fit through the fitting to continue on to the booster. Can I connect another piece of wire to finish...

My Pentair Whisperflo finally arrived today. Below is a picture of my current setup for reference. 1. Hacksaw or sawzall to cut PVC? 2. Pump is 2" and pipes are 1.5". I'm thinking a 1.5" x 2" adapter. Threaded on the 2' side and slip on the 1.5" side. Sound correct? 3. For materials, I...

Below is a picture of my current equipment. I have ordered a Pentair Whisperflo WDE-3. Originally I planned to DIY the replacement, but this is going to be a busy week and it needs to get done ASAP, so I plan to have a local shop do it. While they are here, are there any other issues I should...

I posted a few questions about pumps recently and decided to stay a while longer. Mrs. Sprocket and I are motivated to get our pool under control. I've delegated the chemistry side to her while I tackle the hardware issues. We just ordered the TF-100 Test Kit along with becoming Lifetime...

Glad I found this forum. I'm a bit of a junky when it comes to special interest forums. My pool is a 16x32 rectangle built in the early 1980's, and I live in Central Florida. Estimated volume is 21,000 gallons. Currently it is a hodge-podge of equipment. The motor has become really loud and I...