Search results

I have an intellicenter I5p single body w/SCG. It was installed in 2020 and has worked well the past 3 years, but after trying to start the pool up after the winter, the display is blank with no signs of life. My current level of diagnosis was to confirm I’m getting power to the board. I...

I’m pretty certain I have a leak at the skimmer faceplate gasket on my inground vinyl lined pool. We have 2 skimmers , both CMP wide mouth. Installation was with 2 gaskets. (Steel pool wall, skimmer, gasket, vinyl liner , gasket, then face plate.) The skimmer itself was attached to the steel...

I have a 400k sta-rite heater and have it hooked to an intellicenter. I hired an electrician to do the wiring, but when I try to turn the breaker on, I don't have any power on the heater control panel. Am I missing something very simple as to why I can't get the heater to power up, or does...

We filled our pool from our well. We knew the risks and knew we would have a battle when the water was 12" deep as it looked green from the metals. Our fears were confirmed when we added chlorine and the water turned brown almost immediately. Enter 5 gallon polyfil filter. It worked...

I took a sample of our well water in for analysis as it is what we are using to fill the pool. Of course I only took it there for the metals, everything else I disregarded.? Turns out I have both iron (.3) AND copper (also .3). Is this crazy high for either/both? We are using well water...

A little background-diy building our 20x40 sport pool. Smooth sailing through everything. Laid vermiculite this week. Got 2 inches of rain a few days later prior to dropping the liner. Pumped the water out. Got another inch of rain after that. Mind you, the hole without this amount of...

Hey all, quick question regarding the timing of laying the vermiculite bottom. We are doing this ourselves with help from a neighbor who has exprience in this area. With weather timing, we have a window of about 4-5 days next week that look clear and sunny. After that (if you trust long term...

Hubby and I are a month in to our DIY build, and so far, so good. Will finish plumbing in the next coming days and be laying the pool base soon. It's been a fun process so far (and I am very thankful we work so well together).??. I figured it was time to post a few pics. This forum has been...

It's been debated already, but based on our 20x40 sport depth (3.5, 6, 4) pool that will be cleaned by a robot...we are leaning on not putting our main drain in. We will have 2 skimmers. I don't think the extra 2 holes in the liner is worth the minimal payoff. Any compelling arguments the...

Put up some walls today and everything was going well UNTIL we started to bring out our drive stakes. Aren't the bolt holes in the stake supposed to be on the other side?? What am I missing?? Help!

Looking for feedback on the attached plumbing diagram. Pool has 2 skimmers, main drain, 4 returns and 1 set of deck jets. I currently have drawn the below listing of valves. 2 each: Jandy Check Valve, 2" - 2.5" (CPVC) 1 each: Jandy 3-Way Never Lube Valve, 2" - 2.5" (CPVC) 8 each: Jandy...

We are in the process of possibly being the OB of an inground pool. Plans are for a 20x40 rectangle, vinyl lined, 48" steel wall pool with polymer walk in steps. Sport pool bottom: water depth on walk in side will be 3'6", then 5'4" water depth in the middle, and then to a 48" water depth on...