Search results

My salt cell leaked second time from top. Is there recommendations for sun shade over cell in Florida heat.

I have jandy cell which is leaking fron top clear plastic, there is a crack I put super glue now its leaking EVEN more. Where can I buy replacement for cheap TRUCLEAR11K Jandy Cell Replacement R0693900

I have intermatic T104R timer . 1. Power is ON, I can feel grove rotating behind plate. The dial wont rotate so it wont show time. I also pulled & press back dial couple of time no luck. 2. On / Off trigger issue, lets first fix the above issue then come to this. Any help is...

The black tube in picture is leakking

Pool pump wont prime 1. Cleaned filter 5 times 2. lubed the O Ring 5 times 3. Strainer basket cleaned 4. Did bubble check on intake , no leaks found 5. all inbound / outbound valves are open. 6. pump is 1 year old 7. strainer basket only gets 80% water 8. skimmer us OFF, not air is been sucked...

I have Electric AquaCal Titanium heater , 'HEATING' light wont come on 1. Water is flowing through heater 2., Shows current water temp / desired temp (set to 85) 3. All surrounding are clear 4. Fan is running & blowing cold air 5. Checked water return for temp diff, Its the same as input 6...

All, I installed this may be 1.5 yrs back. 1. New O ring with Lube 2. Switch on RUN 3. Cleaned the unit 4. Pressure @ 20 on Unit Still i wont rotate the base valves. Help Thanks and Merry Christmas.

Just saw my pool level went down by 3 inch . After investigation found out that my heatwave heat pump is leaking Model # H125F-A Any clue where should I start looking Also I do not have manual for it,

1. I had Low salt light & inspect cell lights on 2. Added bag of salt 3. After few days checked the indicators same lights 4. added another bag of salt (stupidity) 5. Again the two lights came on 6. Removed the cell & put it in bucket with muratic acis + water 7. dipped the cell with cable part...

I had salt reading of 2200 , added one bag reading went to 2300 , added another bag reading show 2500 1. Cleaned the filter 2. Cleaned the cell in water + muratic acid 3. Did set the reading (Auto, OFF , 5 times , Super Chlorinate , auto) Now the display say 2500 as salt & Low salt & inspect...

Since October no rains here in Orlando. Since then my pump runs 6-7 hours daily I noticed my water level has gone down about 4 inch. I check pump are no visible leaks , however in the house closing / inspection report I have invoice saying the distribution valve leak was fixed ($120), I...

Yesterday I was weedwacking & my flow switch wire got tangled in my wacker. Now on the display I DO NOT have any LED's No power / No Generating What could be the cause & what will be solution ! Thanks,

I have tiny crack near guage indicator. When I replaces the guage indicator , I used the tape on thread. The leak is very minor but how can I fix it or I have to replace the whole head ! Regards

I have in ground paramount 6 module. When I start the pump all heads pop up, but only 3 out of five get pressure. On the valve pressure gauage does not move (may be bad). When I shut off pump all heads go down so there is some movement. I took out the value & washed it couple of times...

My pool pole wholes have become big & brush & net keeps coming off any solutions !! :P

When I clean my pool deck with pressure wash small debri/dirt fell on pool bottom. I tried vaccum / brush but it wont come off !! It is stuck on the bottom Is there special brush for this ? :hammer:

Suddenly on my AquaRite Salt Chlorinator Power light went off. When I start the pump GENERATING comes on for while & that too goes off Any idea ?

I pressed diagnostic button after I clean the CELL The first display used to be 3300 for salt , now it shows as 3.30 , dont have clue how to reset it back

I am in Orlando, It was above 90 all these time a pool was clear Since last 3 days its beeing 85-86 and pool turning green. I am running 8 hours salt level is 3200. My test FC 7 CC 0 TC 7 Ph 8.2 TA 100 CH 700 CYA 32-35 cl - 5 br - 10 What should I do ?

Checked Skimmer basket cllean Basket near pump clean and no bubbles Cartridge filter 30psi Paramount pump ZERO PSI Water comes out from one pop heads only Cartridge filter cleaned All valve lubed properly Paramount cleaner opened and cleaned Still small amount of bubbles come out from pop up...

FC: 13.5 CC: 0 TC : 13.5 Ph 8.2 T/A 150 CH 780 CYA 65 questions 1. While doing CH I added 78 drops still color could not turn blue, I am wrong anywhere 2. My CYA test fill bottles label has come off, can any one tell me where to stick it again ? because I need to flll below & above label for...

I have 1 yr old cartrige C1750. There are 5 bands stick around the cartridge . 2 of the bands are loose & 1 band has come off. Can I use super glue to stick them back !!

1. I noticed my return water at bottom of pool is coming from one point only. It used to randomly rotate from different points. 2. My cell 15 is about 6 month old, I cleaned the cell with the hose water. Now the display says inspect cell ?

My aquarite was showing low salt last week about 2700 , I bumped it up to 3100 7 days a go. Yesterday again it shows 2800, My pump runs 8 hours a day. Can it use salt that fast ? :roll:

I am planing to start my pool in April first week. Pool is crystal clear blue , running my pump daily 3 hours (Florida winter) Question When should I increase my pump run time ( now a days its 80 in days time) Should I put 25 lbs of salt in pool !! Do I need to put or do something extra...

http://www.familydollar.com/documents/p ... n_1015.pdf $5 off $25. Bleach is $2.50 for 182 Oz. Thanks

Instead of putting regular bleach I put fresh meadow (three cans 182) in my pool WILL this be issue ?

My gauge meter on my cartridge filter as well as in-floor cleaning valve has become foggy and cant read anything. is there a way to clean it or can I replace it ? Thanks :|

Problem. Water is cloudy Note: My pool is 15K gallon , concrete, Location : Central Florida Pump is running since 9/12 till today I DONOT have pool vaccume History of events: 9/11 : water was greenish / cloudy added algaecid after 1 hour 2 shocks clean filer every 4 hours...