Search results

  1. M

    Hayward heat pump error

    My brother has above ground. Bought a Hayward heat pump hayward w3hp50ha2 heatpro heat pump this year and first season using it. All of a sudden there’s no display and a constant low beep to it. I have videos I’ll try to post. With pool filter on and heat pump fan running it peeps. With pool...
  2. M

    Bromine vs mineral

    I have a hydropool serenity spa. 1st year used bromine. This winter i switched to mineral sticks instead of added bromine. I noticed since going to mineral sticks in the summer now that it’s been getting hot the water smells very moldy/mildew. I usuallly dont add anything to the water with...
  3. M

    New salt chlorinator or Slam?

    28000 gallon, inground pool, I have the aqua rite T15 Salt chlorinator. I installed it in 2016 so this will be its 8th year. Says it’s generating chlorine but when I tested, I’m only getting one 1.5 ppm of chlorine. I run it seven hours a day at 50% setting. I’m wondering if it’s at the end...
  4. M

    3rd jet?

    I have 28000 gallon IG pool with two jets. I have a 3rd plumbing pipe not in use. It Is designated for a robo vac should I have one hooked up to the pump but we don’t have one. Should I make this this into a 3rd jet? I was Wondering if it would help circulation when heating
  5. M

    I’m SLAMMING question

    almost 24 hours into slamming I lost about 6ppm overnight. Water is nice and clear but I’m still trying to hold FC at 28. I will test tonight and then The morning and see how the overnight FC looks. Question, I was testing the FC every couple hours and adding chlorine but if I keep up this...
  6. M

    Ca hardness question

    Just changed my water in my 400 gal spa. After I filled it up I did a CA hardness test w my Taylor testing kit and got a reading of 30 ppm. I added about 6 oz of CA increaser last night and when I tested it today I couldn’t get any reading of calcium? When I added the Reagent the water...
  7. M

    Spa chlorine loss

    400 gallon hydrpools w ozonator FC 0 TA 90 PH 7.5 CH 180 this is a new tub and I can’t get it to hold chlorine. It got real cloudy so I brought it up to school level last night and kept adding chlorine to keep it at 14 ppm. 11:30 last night FC 14ppm 6:30 this morning 1ppm (it is much clearer...
  8. M

    Chlorine in spa

    I noticed when I add chlorine to my hot tub 400gal the chlorine drops pretty fast and doesn’t hold. Do the same rules apply to a spa as a pool regarding SLAM? And should the hot tub hold chlorine for the day? ph 7.5 TA 80 CYA 30 Calcium 180 FC 0. I added 1.5oz of chlorine this morning.
  9. M

    Pool evaporation

    I’m in Mass with IG salt pool. I feel like I’m losing a significant amount Of water? Maybe an inch in one week? I did add the liquid solar blanket not sure how that is effecting it.
  10. M

    New hot tub/wiring.

    We just purchased a new spa, Hydropool 5900. When it comes in do you think I should wire it myself or should I hire an electrician. I’m quite handy I hooked up the pool heater on my own and wired my whole basement when I finished it. I already have 100 amp sub panel outside 10 feet from where...
  11. M

    Tough algae

    Thought I had mustard algae. I was getting what looked like sand on the bottom and yellow spots and it was eating all chlorine and some yellow film around edge of water. Slammed at 24ppm all last weekend with pump running for 3days until passed over night test, clear and cC of .5. Yesterday I...
  12. M

    Is this a type of algae or mold?

    My water got cloudy this week and I noticed my grids needed backwashing. I took it apart and cleaned. I also added a bunch of shock. Water is nice and clear but on the bottom of the pool there is a white cotton like substance growing all over. It literally looks like a darker white like cotton...
  13. M

    Pentair VS air bubbles

    I bought a Pentair Superflo VS pool pump. I love this pump. I have 1.5 inch plumbing. Been using it for about a month now. I notice when I run it at about 1400 rpm I see air bubbles flowing through the pump basket then out the returns. After it runs for awhile I notice the water gets lower in...
  14. M

    New VS pump bonding?

    I’m going from my one speed Super pump to 1.5 Pentair VS pump. My question is, as u can see in the photos my old pump had the bonding wire connected to two places on the pump. One st the bonding lug and the other was attached to that metal pipe. I’m not sure why the builder added that metal pipe...
  15. M

    Pool eating up chlorine.

    I may have some algae, I thought it was pollen on the bottom but maybe not. I noticed my salt cell barely making chlorine so I added a bunch of chlorine and checked stabilizer. At first I thought it was my salt cell but I was wrong. I added some cya and its a little higher than I’d like. Pool is...
  16. M

    Pump prime

    ‘‘This is the first year I opened my IG pool myself. I have a question about my Hayward super pump. After it runs and then turns off I notice the next day when it turns on that if I look inside the pump cover the pump has to prime itself and the water has to fill up under the lid of the filter...
  17. M

    Rhode Island paint or plaster?

    I am asking this question for a friend. My pool is a vinyl pool so obviously this question does not pertain to me. My buddy lives in RI and has a fairly large IG concrete I assume gunite pool. It's 20x40 and 12 feet deep in the deep end. He said its about that time to resurface the pool. The...
  18. M

    Opening pool de filter cleaning.

    This is the first year I’m opening it on my own. I closed it last year. Question on cleaning de filter grids? I took them all out and sprayed them all clean with the hose at closing. What kind of cleaning should I do to them before putting it back together? Some say they soak them in a barrel...
  19. M

    heater 60 amp panel?

    Question for ya. I have a 60 amp sub panel at the pool shed that is running off of a 100 amp sub panel under my porch. There are no other circuits on the 100 amp panel just the 60 amp circuit. It's just there in case I ever decide on installing a hot tub. How many amps can I run off the 60 amp...
  20. M

    Closing IG pool suggestions?

    Considering closing my pool for first time. I'm Very handy and love to learn. 2 skimmers, main drain, 2 returns. I've attached a photo. Pump is a pretty good distance away from pool. 1. What should I use shop vac or compressor? I don't have either yet. 2. Where should I blow out the lines...
  21. M

    Closing, how to pull from main drain

    I started lowering the water below skimmers in IG pool. I then was like i should check the ph and it was high around 8. Was going to add some muriatic acid by then thought how can i recirculate if water is below skimmer? I figured i could just set the pump to recirculate instead of filter and...
  22. M

    Tree near this pool

    Looking for more privacy from neighbor. Hes gonna plant green giants on his side at some point. In mean time i wanted to put a tree behind this shed between back of shed and vinyl fence. It's about 35ft from pool. I picked up a hybrid poplar and grows real fast, but i read tgeir roots can be...
  23. M

    Taylor test kit

    I use the taylor 2006 test kit. My dpd has turned black and hardened. I just ordered a replacement dpd. Why does thishappen? Its also stained my test tube vial with some black spots that i cant really get off.
  24. M

    De filter question

    Took apart my filter grids and cleaned them up. Put it back together and turned pump on. I then added the 5 scoops of de powder to skimmer. After running for 5 mins i noticed i had a leak at tge gasket. So i had to drain out some of the water from the filter which had some new de in it because...
  25. M

    I made a mistake......

    My pool water has been crystal clear. Went away for a few days, came home and the water was a little low due to evaporation. I have well water and the back yard spigot is filtered through sediment filter and softener. The front yard is not filtered at all. I put the hose in the water and used...
  26. M

    Workin good but how'd this happen??

    Had the paver Guys here today, I got home n there was no power in my house. Couple fuses in the main panel were tripped as well as sub panel to pool. They must have tripped outdoor breaker when using wet saw. Anyway I noticed pool pump was not running so I turned on breaker on subpanel. When...
  27. M

    Gunite vac in vinyl?

    I havent made the leap to a robot yet. With a vinyl pool i was looking to at least replace the cheap vac head i have with one that has wheels. I had ordered this one Amazon.com : Ocean Blue Flexible Swimming Pool Vacuum Head with Chrome Handle Garden and when it came in i realized it says "for...
  28. M

    Ready to add salt

    Weather is warming up and ready to move away from bleach everyday and get the swg going. 30k gallons and never added salt before. Any best practices for first time salt user? Figured id add 500 lbs tonight and turn on swg tomorrow? Pool math called for about 750lbs. Water is balanced bit ill...
  29. M

    Thinking of purchasing a heater

    Moderator Note - Moved from this thread Anyone deal with inyopools.com Im thinking of ordering a heat pump from them
  30. M

    First time balancing!

    Just had our new vinyl pool opened up tgat we installed in the fall. I plan on getting it balanced then converting to swg. I used my taylor 2006 test kit and here are my levels. 18x44 IG pool. about 29,000 gallons Free Chlorine reading- couldnt get a reading, when i added the dpd the color...