Search results

Could this be the model number ?

Ok, so after reading some threads on this amazing forum I realized that is NOT the correct relay, following the wire marked pump leads to this relay, marked in blue : Does it seem right to you ?

So the pump is not shutting off from the control panel , even in Service mode, I can hear a click but pump continues to run. My home warranty apparently cover only the pump and wiring :mad: not the actual controller so I figured out that must be a relay becauise everyhting else works just fine...

Hi Guys and gals, can you recommend a place to buy the universal Dolphin caddy? I have the Dolphin cleaner but is a pain to deal with the storage. Thanks in advance. PS I would prefer to get a good deal and also to help this great site in the process.

i think the pump is a NorthStar like these one in the diagram below

Hi Guys, recently the pump is making a lot of noise , I think is the motor but now 100% sure as this is a very old pump too. Any suggestions for a replacement, either motor only or the whole pump? Please help ! I have a friend who is certified electrician so installation should be easy.

Hi James , where can I find a manual with the sequence and the correct values for the display ? I am struggling to get a correct reading for salt level. Cell was tested at pool store and passed, salt level is 3100 also tested at pool store but system shows a weird number of 3.8. Please help.

Update : I took the cell to Leslie's and cell is fine , generating so it passed their test. When I came back I was planint to do an acid wash so started the pump without the cell , added the threaded pipe , and surprise surprise the SWG system shows same reading like when the cell was attached...

Do you have a link to your products ?

I’m interested too.

So I cleaned the cell because was working for more than 3 months now, before cleaning salt level shown was 3100 after using garden hose to spray some debris in the cell and reattaching the salt level is 2.80. I tried to get a new reading but no luck. Power and Generating lights are on . PCB is...

Started dumping water, I’ll refill and check again :sick::ROFLMAO:

Good question , previous owner said 35000 gal. I did all calculation for 33000 to be safe. Pool is kidney and pretty deep so can't measure and calculate. I re-did the measurement with water form different part of pool and same result. Seems that I overshoot by a lot. Don't understand why, maybe...

I'm gonna re-test tomorrow ... fingers crossed , maybe water sample was from a pool of CYA.. lol. This gonna suck....

I tested the water after the rainy season we had here in California and CYA showed 0. Repeated the test at Leslie's and result was also 0 . Pool is about 34000 gal so the recommended amount to add is 19 lb to reach 70 ppm. Already added the 19 lb, last scoop today, and reading is off the...

S200 FTW, this robot is absolutely amazing , Had a suction side MX6 and was always clogged by pretty much anything, mostly small twigs and green leaves stuck in the mechanism. Just got the Dolphin 200 from Marina Pools , see the thread about Margaret, and never been happier.