Search results

I turned the hose on full blast, let the pump run for a few minutes,.. should have gotten a low salt?? It ran for a minute just like before and both the cell and salt light came on red, and it stopped generating 😢 I’m frustrated, the cell does work for a minute, I see it producing,.. any other...

DSP had me adjust a screw that controls the sensitivity of the salt sensor,.. still runs for less than a minute, then the red cell light and red salt light come on and it stops generating. I have removed the timer, the pump and swg are now on their own circuit. Still not working😡

I started with my salt at 3500 which is where I kept it for my intex. When this swg didn’t work I raised it, then we had several days of rain and lots of overflow, when I rechecked it it was 3200, so I brought it back to 3600, then Saturday Discount Salt Pools said to raise it to 4000 and try...

Another update Adding the jumper didn’t fix the problem. I added it, then when I turned it back on it ran for maybe an hour, when I went to check it all the lights were flashing on an off, bright green and there was a clicking sound. Discount Salt pools shipped me a new control panel. The jumper...

I just purchased mine from discount salt pool. It is 110 or 220. Great customer service.

I just purchased my sj-45 with that deal!

Update I spoke with The fabulous people at Discount Salt Pool today. Evidently some of these were sent from the factory without a “jumper” installed. He sent me step-by-step instructions, including pictures to replace the jumper with a 14 gauge wire. My husband installed it today, plugged...

It’s GFI. I have the swg and the pump plugged to a timer. I’ve tried removing the timer, but it still shuts off.

The pump and the swg are on the same circuit. The pump alone hasn’t thrown the breaker. According to Circupool there is no max salt limit. My manual say 3500+.

I was told by circupool that it does auto adjust. I have turned it off and unplugged it until I can get it figured out. My husband has just told me that the breaker has blown three times since I installed the new set up. Guess I need to wait for the electrician.

It is the newest unit, it did come with the flow switch. Both the pump and the swg are on 110v. When I originally received the swg I spoke with circupool and they told me it would work with either. Electricity is not my thing, unless we are talking about your heart. Is there a reason I should...

Thanks for your help everyone. I did brush the salt and then ran my robot several times. I added the extra salt over a week ago. the flow meter is very close to the pump,. This set up is way bigger than my Intex was and I did have to get creative to fit it all in my space. This pic is with the...

And Discount Salt Pools tech support is closed on the weekends😩

Thank you! Yes,. I am using the K-1766. With my old Intex swg I kept my salt at about 3500, so I raised it before installing the new sj45. Tried to get some pics, let me know if I didn’t include what you need.

Can anyone help? I just installed a new Circupool sj45 swg and a Hayward 21” sand filter with single speed 1.5hp pump. When I turn on the swg the flow light is green, the generator light turns green and I can see the chlorine gas through the clear cell tube. It runs for maybe 30 seconds, then...

It was leaking foamy, "new sand, new install" yuk, before I even turned it on. So,..I pulled the blue O ring from the skimmer basket. It didn't look like it fit right, and the basket had a leak. I placed the blue O ring on the multi-port valve and reinstalled, leak fixed. Looking at the parts...

Hayward W3S210T93S ProSeries... https://www.amazon.com/dp/B07SR4MF3X?ref=ppx_pop_mob_ap_share I just received this,. After install it is leaking horribly around the multi port valve. I received one bright blue O ring, no more. Am I supposed to have one for the valve and one for the skimmer...

Our tears are approximately 7000 ppm of salt. It isn’t the salt causing this.

Hayward W3S210T93S ProSeries 21-Inch 1.5 HP Sand Filter System Amazon.com : Hayward W3S210T93S ProSeries 21-Inch 1.5 HP Sand Filter System : Garden & Outdoor Does anyone have this model? The price is great, but bad reviews on Amazon. I thought this is what I wanted,. But the reviews scare me...

https://www.amazon.com/Hayward-W3S210T93S-ProSeries-21-Inch-Filter/dp/B07SR4MF3X/ref=sr_1_2?crid=WTA2MH2I5ML7&dchild=1&keywords=pool+sand+filter+with+pump&qid=1617984448&refinements=p_89%3AHayward&rnid=2528832011&s=lawn-garden&sprefix=pool+sand+filter+with+%2Cprime-instant-video%2C196&sr=1-2...

I have,.. contemplating glue,.. not sure I can glue it without blocking the flow.

So, I left my pressure gauge out over the winter, won’t do that again. This is season three of the intex sand filter that can with the pool. I purchased a new gauge, when I tried to install it with the same hardware, it won’t tighten. Can that piece be replaced? I was hoping to get at least 3...

My SWG runs the full 12 hours during the hot months. The Intex SWG is either on or off, you cannot adjust the output. According to pool math it generates 2.9ppm in 12 hours. So if you are losing more than that a day, you need to add. My CYA is about 60, and I have added borax. My goal is to...

I can't imagine the trouble keeping up with my pool without my SWG. I have a relatively cheap Intex XTR frame 32'X16'X54" pool. I bought it before COVID shook the world, so the pool, pump, sandfilter and SWG was less than $2000. This is only my second season, so I can't speak to longevity, but...

I’m using MyTouchSmart plugs,.. they work for everything else,.. just not the light😩