Search results

I have a 3000 gal spa with it own plumbing system. I have had trouble with leaks for years. Thought it was leaking at the throat of skimmer and did many patches last year. Finally brought in a professional company last year who said the leaks were from the jet tubes and they replaced them...

Got it back today - great turn around. Swapped motor, 18 foot cord and LED assembly. Works now.

Mine was sent to Maytronice by Fedex ground to PA repair area on Weds. They received Thursday and sent back Friday for Saturday delivery. Assuming I get it tomorrow as scheduled, pretty amazing turn around/. No communication with them so I dont as of now know the issue with it - assuming its...

No more High Limit 2 errors since I changed UG. Heater brought temp from 75 to 82 successfully on large pool. Problem solved this time. Thanks for the help.

Actually I decided to remove the UG before I saw this. Ended up replacing it (good thing I had a spare from past bad experiences). Seal/gasket was completely warped and I doubt water tight. UG was also badly green. Hopefully it will work better now. I will report back. I did not check...

I am reactivating old thread as I seem to have similar issue this year as last. Ran pool heat for first time today. I got consistent HiRes2 shutoff at pool heater at 2500 rpm and 2800 rpm. It now seems to be running with VSP at 3300. My question, why might pump require higher RPM each year to...

What i your recommendation then for a more cost effective pool cleaner? I have until Aug 2024 on warranty, but could use a backup plan too.

I finally reached Maytronics by phone. I am under warranty still. They sent me a Fedex label and I paid for packing to get it to the, They should have tomorrow and I should have coverage. I am guessing its the cord since the lights on the cleaner dont turn on but power supply seems to work...

Was away 6 days. Came back and Dolphin wont work at all. Power supply seems to function. Lights work as normal, but the lights on the clearer itself and motor never come on. Acts like it's dead. Any thoughts? Emailed Maytronics and sat on hold for 30 minutes or so.

One more update. My network connection has been maintained for over a week straight now. I made one adjustment and turned off my nightly router reset. It seems that the DHCP connection gets messed up when it loses connection to the router and does not reestablish it until the dolphin itself...

Update: Maintained good WiFi connection Thursday-Tuesday. Today when I first looked, WiFi was reseting every 30 seconds or so again. Unplugging and repowering the Dolphin restored connections.

I am pretty isolated in the woods. I highly doubt competing wifi would come from anyone else, but I do have some WiFi issues from competition within my own networks. The cable company installed its own router/network which I dont use but is needed for its STB boxes. Having said that, my pool...

I am unable to establish and hold wifi connection this year. The app tries to connect and gets to somewhere between 50 and 75% connected, then gives me a failed to connect page. I can see on my router's client page that the dolphin connects and disconnects frequently, even when I am not trying...

Thanks for your help. I found and solved the problem. It seems there is a setting on my OneTouch keypads that is not duplicated on the iAqualink screen (at least I cant find it). The setting is part of System Setup and allows you to assign a chlorinator to a pump. Turns out both chlorinator...

Here are the two screens that illustrate the problem. I reconnected the AquaPure/spa and the issue remains. Setting says it should be 10%, but it Jandy is sending the pool setting to the spa SWG as well. Only other thing I can think of trying is disconnecting the pool SWG and seeing what...

My pool chlorinator is a Hayward AquaRite. My pool water has been just short of 60 degrees since I opened it. The AquaRite operates at 20% when the water is less than 60 degrees, and it does this by turning off after producing some chlorine initially. With the five scheduled starts, I am...

Yes

Here are the VSP schedules for each pump. I cannot do the AquaPure screen until tomorrow because I disconnected the second (spa) AquaPure from the Jandy. I will reconnect and post a screen shot when its daytime. But for now, suffice it to say my screenshot before I disconnected was similar to...