Got the pool up and running for season and all looked good when running. Held pressure and initially saw a leak at the fittings for the SWG but that was tightened and all good.
This morning before pump kicked on the reservoir was empty so I know there has to be a leak somewhere. Took about 15 seconds to fill the pump and run then I started to see water dripping from underneath motor and reservoir in the picture here. After it’s running it dries up and there is no active leak. So is this a seal inside with the motor? Is it a simple fix or should I just have a pool guy address it (I don’t want to make a bigger problem)?
This morning before pump kicked on the reservoir was empty so I know there has to be a leak somewhere. Took about 15 seconds to fill the pump and run then I started to see water dripping from underneath motor and reservoir in the picture here. After it’s running it dries up and there is no active leak. So is this a seal inside with the motor? Is it a simple fix or should I just have a pool guy address it (I don’t want to make a bigger problem)?