- Sep 9, 2017
- 36
- Pool Size
- 30000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
All,
We haven't used our heater for a few years so I decided to go out and make sure everything looked good.
Unfortunately, I couldn't get it to work.
The backlight of the display works but nothing ever shows up on the screen - and it doesn't appear anything else is happening.
The power button turns the display light on/off. The up/down arrows don't do anything. Holding them at the same time doesn't do anything.
I took off the control board that holds the display and made sure everything was cleaned, fuse was good, etc.
The fact that I don't hear the heater try to kick on makes me think the issue isn't the actual display but rather the board itself or something else.
Any other ideas before I spend $300 on a new board?
Thanks in advance!
Model: P-D336A-EN-C
It appears it was manufactured in 2013.
We haven't used our heater for a few years so I decided to go out and make sure everything looked good.
Unfortunately, I couldn't get it to work.
The backlight of the display works but nothing ever shows up on the screen - and it doesn't appear anything else is happening.
The power button turns the display light on/off. The up/down arrows don't do anything. Holding them at the same time doesn't do anything.
I took off the control board that holds the display and made sure everything was cleaned, fuse was good, etc.
The fact that I don't hear the heater try to kick on makes me think the issue isn't the actual display but rather the board itself or something else.
Any other ideas before I spend $300 on a new board?
Thanks in advance!
Model: P-D336A-EN-C
It appears it was manufactured in 2013.
