Since water temp affects LSI numbers, which LSI number should I believe? The number in the morning when the water is cooler, or the number in the evening when the water is alot warmer? Thanks!
LSI result
- Thread starter Howler2020
- Start date
- Jun 22, 2014
- 48,145
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
A small variation in water temp shouldn't be a deal breaker either way, but if you were to err on the side of caution simply due to the propensity of scaling in your area, I would lean towards a warmer number. In the grand scheme of things, as long as your numbers are within the TFP recommended levels, you should be good. No need to be overly critical about CSI unless you a specific reason to do so (i.e. SWG).
www.troublefreepool.com
What Are My Ideal Pool Levels?
Use our tool to find ideal chemical levels for any swimming pool. Check TFP recommended levels on pH, free chlorine, cyanuric acid, and more.
www.troublefreepool.com
- Jun 22, 2014
- 48,145
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
When you get a moment, consider updating your signature with all of your pool and equipment info. It will help tremendously in the future when members reply to your questions. The link below should help.
www.troublefreepool.com
Create Your Signature - Further Reading
www.troublefreepool.com
Done.When you get a moment, consider updating your signature with all of your pool and equipment info. It will help tremendously in the future when members reply to your questions. The link below should help.
Create Your Signature - Further Reading
Similar threads
