New Pool -Upstate NY
- Thread starter phrantic09
- Start date
Congrats !!!!!!
It looks like your setup is dirt simple. Both may work down to 1000 RPMs or lower. My 1st pool did although i forget the exact #s, but both were under 1000. I skipped the HP for pool #2 but SWG cuts off at 700 RPMs.
I love that dark liner! Your water color is going to be very pretty!
Thanks. Turns out I was wrong, it runs at 1650 from noon to 6AM then shuts down until noon.
Our HP needs 30gpm, the SWG 20. If we can do less than where we are that would be great.
Very pleased with it- we spent 6 months deciding which one we wanted before settling on this.
No two systems are the same. Start yours at low RPMs and increase by 100 until they come on. And also find where the weir doors are bobbing along (skimming) and any other functions you may have.
Add 100 RPMs to each function to account for slightly less flow as the filter gets ditty and that's the minimum speed needed for each function.
You run the lowest speed that accomplishes what you need, then raise it when need be to heat (etc)
Similar threads
