First thank you for letting me know that we are not the only ones with a hybrid pool which few pool repair personnel have knowlege about. Thoughts on how to repair a probably 30-40 yr. old pool that has a crack in one fiberglass panel and a bulge in another panel. Our decking has dropped which is probably contributing to the problems and I didn't fill up the pool completely after closing it down in the fall so that probably didn't help either, plus we had minimal snow which usually gets to the pool to the full mark by the spring. It was probably 3-4' below the full mark when opening up.
Choices - fill it in (don't want to do because the pool has a rather large retaining wall around it), perhaps try a mesh patch repair which would be unsightly I am told but would last a few years or dig out the section to repair the rock/concrete behind the wall and redo the section of wall (sounds expensive).
Your thoughts and opinions are appreciated.
Choices - fill it in (don't want to do because the pool has a rather large retaining wall around it), perhaps try a mesh patch repair which would be unsightly I am told but would last a few years or dig out the section to repair the rock/concrete behind the wall and redo the section of wall (sounds expensive).
Your thoughts and opinions are appreciated.
