It is time to switch over to the SWG from the chlorinator for my startup process . I am in need of some help. I am trying to learn the BEST way to do this. I have some questions and would be grateful for any help and advice that can be provided. Any helpful links would also be great.
I have a 15k Pool with a Hayward SWG TCELL 925 controlled by the Pro Logic Panel.
1. Are there optimum chemical ranges that the pool should be in BEFORE adding the salt and turning on the SWG? My CYA is starting to get high from chlorinator pucks its at 100 right now, FC was 9.5 , PH 7.6
2. When determining how many pounds of salt to add for a start up I know I need to look at the manual for the SWG and all it says is ideal range 2700-3400 ppm how do I figure out how much salt needs to be added to achieve this range ?
3. I read that range settings should be based on how long and speeds you run your pump at . I am not sure what I will run pump at for fall and winter as this is the first season with the pool so how do I set this at the start and when /how do I need to change it ? ( I am in TX)
3. Best way to add salt? I assume not all at once ? Do it in stages ?
4. Does the pump run while adding ?
5. How long to run the pump after adding 24/7 ? For a bit .
6. Does salt need constant adjusting like chlorine ?
I have a 15k Pool with a Hayward SWG TCELL 925 controlled by the Pro Logic Panel.
1. Are there optimum chemical ranges that the pool should be in BEFORE adding the salt and turning on the SWG? My CYA is starting to get high from chlorinator pucks its at 100 right now, FC was 9.5 , PH 7.6
2. When determining how many pounds of salt to add for a start up I know I need to look at the manual for the SWG and all it says is ideal range 2700-3400 ppm how do I figure out how much salt needs to be added to achieve this range ?
3. I read that range settings should be based on how long and speeds you run your pump at . I am not sure what I will run pump at for fall and winter as this is the first season with the pool so how do I set this at the start and when /how do I need to change it ? ( I am in TX)
3. Best way to add salt? I assume not all at once ? Do it in stages ?
4. Does the pump run while adding ?
5. How long to run the pump after adding 24/7 ? For a bit .
6. Does salt need constant adjusting like chlorine ?