I've had the same wiring configuration for 10+ years at the pump equipment site. Primary electricity to breaker at the main box to GFCI outlet at pump site to intermatic 101 to motor. In normal times there would also be a saltwater generator wired to the intermatic as well. Currently that is not the case, i have pulled it to limit possibilities.
I am having intermittent issues of the GFCI tripping and then i am unable to reset without tripping again. i have pulled it all out, replaced with new connections and fresh grounding connections. Then, it will work for a week or so then trip again with the inability to reset. I did not replace the GFCI itself.
Thoughts? and what other info can i provide to help? thx, SR
MOderator, please move if i posted in incorrect forum.
I am having intermittent issues of the GFCI tripping and then i am unable to reset without tripping again. i have pulled it all out, replaced with new connections and fresh grounding connections. Then, it will work for a week or so then trip again with the inability to reset. I did not replace the GFCI itself.
Thoughts? and what other info can i provide to help? thx, SR
MOderator, please move if i posted in incorrect forum.
Last edited: