I’m building an L shaped 55,000-gallon pool with a tanning ledge that will have 2 bubblers. The bubblers will connect to a manifold then to 2” pipe to the pad. 4 skimmers including 1 in the tanning ledge and 7 wall returns including 1 in the tanning ledge will also be independently plumbed back to the pad. I'm using 2” pipe, sweep elbows everywhere and I'm putting valves on each leg at the pad. I have not calculated head and I realize this is an important variable that will effect things along with desired plume height so I am just looking for some general advice. Do most agree I should probably use a booster pump for the bubblers?
Thanks in advance for any advice.
Thanks in advance for any advice.
Last edited: