- Jan 25, 2022
- 45
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I am having trouble with my IC40 constantly producing @ 100%. I have tried to turn it down via Screenlogic and EasyTouch and the lights on the cell will not reduce to the appropriate level. I disabled the cell in EasyTouch and tried to use the manual buttons to turn down the cell and nothing happens.
The cell is +- 5 months old, I asked the PB to come out a few weeks ago when the cell was reading salt level @ 9900, they told me that I needed to acid wash the call and that falls under preventative maintenance which is not covered.
On inspection, there is what I consider to be a small amount of scale on two of the plates. I ordered the fittings to do the acid wash but have not done it yet.
I am doing my best to control the FC by adjusting the pump run time. What am I missing?
The cell is +- 5 months old, I asked the PB to come out a few weeks ago when the cell was reading salt level @ 9900, they told me that I needed to acid wash the call and that falls under preventative maintenance which is not covered.
On inspection, there is what I consider to be a small amount of scale on two of the plates. I ordered the fittings to do the acid wash but have not done it yet.
I am doing my best to control the FC by adjusting the pump run time. What am I missing?
