They just finished installing tile. I guess sometimes the height of the bond beam is not level. The tile guy kept the border level. So in the ledge, in order to have no cuts there is a small gap in some spots. I would say 3/4 max in some spots. The plaster will be half inch. Will this look uneven once they plaster?
Question on Bondeam Beam being level and title
- Thread starter SKEDADDLE
- Start date
- Jul 21, 2013
- 65,680
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You mean at the bottom of the tile line?
No one will see that area once there is water in the pool.
No one will see that area once there is water in the pool.
Toxophilite
Silver Supporter
More than likely, they will plaster to thickness of gap at least, even if it's a bit more than 1/2". It's the floor not completely uniform, which understandable at that slight amount. The important thing is that tile is level to water level. That's where the eyes will see anything not level.