Only 2 of 4 returns are working?

Stephs2125 · May 13, 2022

Hello! So the pool company just came out and “opened” the pool for the season. All I have them do is the physical/hardware stuff (safety cover, handrails, diving board, skimmers, etc.) I take care of the water chemistry. However upon start up only two of my four returns have water coming out of them. I’m worried that means a pipe or pipes might have a clog or something. Any suggestions for troubleshooting? I can bring the pool company back out but if it’s some thing I can narrow down myself first I’d like to start there.

I’m just about to start running my tests on the water I wanted to let the pump / vacuum run a bit, stir things up to get the most accurate reading.

Stephs2125 · May 13, 2022

Water opened up looking pretty good. Some debris on the bottom mostly dust and dirt. On the shallow end I can see clear to the bottom. Deep ends a little murky yet.

mknauss · May 13, 2022

Check all the valves at the equipment pad to be sure they are in the correct position.

Stephs2125 · May 13, 2022

Here’s what I have. They seem to be in the correct position. I only have one return valve that supplies all four returns. The WF is my waterfall which I’m not currently running.

Stephs2125 · May 13, 2022

So following up, hubby solved the problem. Of our four returns, one of them was missing the 'nozzle' so the water coming out of it was basically full blast and taking away the pressure (or volume) needed to allow the other returns to work. once we plugged that one, the other two started working. So off to the pool store, I go to buy a nozzle that will help to 'reduce' the flow from that one single return.
So glad it was something simple and cheap (at least this time

)

Newdude · May 13, 2022

THANKS for the pic of that BEAUTY !!!!

#normalizebigpools

Search

Only 2 of 4 returns are working?

Stephs2125

Stephs2125

mknauss

Stephs2125

Attachments

Stephs2125

Newdude