Hello everyone! We just received our SWG and are going to install this weekend. Just confirming that this is the correct spot (three images below)…
Is this the correct install spot??
- Thread starter Pepperdinegal
- Start date
Yep, looks like a good place to me. Last thing downstream before it goes to the returns.
P,
That would be correct... After the heater and before your Return valve.
You will love your new saltwater pool.
Make sure you wait about 24 hours after adding the salt before you fire up the cell.
Thanks,
Jim R.
That would be correct... After the heater and before your Return valve.
You will love your new saltwater pool.
Make sure you wait about 24 hours after adding the salt before you fire up the cell.
Thanks,
Jim R.
Leave yourself room on the output side incase you have a issue and need to replace the union. The heater side would be fairly simple to build from scratch if needed.
I
Know from experience
I
Know from experience
- Jan 7, 2012
- 2,128
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Test your salt levels with a K-1766 before adding the bags of salt. You might already have a substantial amount of salt in your water already.
Make sure you get the purest salt you can find with no additives. This is good salt that's widely available: Diamond Crystal Solar Naturals Water Softener Salt Crystals 100012454
Make sure you get the purest salt you can find with no additives. This is good salt that's widely available: Diamond Crystal Solar Naturals Water Softener Salt Crystals 100012454
Don't buy Clorox pool salt- its been found to be occasionally contaminated with iron. A few pools here have reported stains in their pool after using it.
Maddie
Maddie
Similar threads
