Hi everyone. Im a new pool owner and im in way over my head on foguring this all out. I basically stumbled upon this hoping i could fix the many issues ive been having in figuring this whole thing out.
Hey from S. Florida
- Thread starter Ralphb305
- Start date
- May 3, 2014
- 62,687
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
- Jun 22, 2014
- 52,018
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
www.troublefreepool.com
Pool Care Basics Archives
Your one-stop shop for all things TFP to include: ABCs of Water Chemistry, Recommended Chemicals/Levels, Test Kits, Troubleshooting, and much more!
www.troublefreepool.com
Ralph,
Welcome to TFP.. time to float on over to one of our Subject-Orientated Sub-Forums and start asking questions.
Thanks for the intro,
Jim R.
Welcome to TFP.. time to float on over to one of our Subject-Orientated Sub-Forums and start asking questions.
Thanks for the intro,
Jim R.
elwood58
LifeTime Supporter
Welcome. Take a deep breath and read, read and read some more. Ask lots of questions, and make sure you have a good test kit.
Ive cleaned all skimmer baskets, and filter cartridges. The pump is less than a yr old. It had leaking and i replaced all the o rings. Not sure why it just turns off out of the blue. I yhink its the interface(iqpump01). I havent tried to stabilize it until i can get the pump to work in a consistent manner.
Attachments
Hey Ralph and Welcome !!!
No question is too silly or simple. Ask away anytime !!
With the exception of the MartyBot above, we were ALL there once. Marty was programmed to know everything the moment somebody clicked 'runMartyBot.exe', but for the rest of us, it SUCKED and we've never forgotten. Will will GLADLY help someone else have a better time with it.
No question is too silly or simple. Ask away anytime !!
