I have a Dolphin Triton PS that was recommended on here. I have had it for 4.5 years. It started stopping mid vacuum and now it won't work at all. So I need a replacement. I believe I got it from Doheny's. Is this still one of the most recommended vacuums? I cannot locate it on the website, so wondering if it isnt being made?
Expensive summer for me.... My robot broke
- Thread starter sersee
- Start date
Check with Marina pool and spa, seems to be a robot shortage. They may have an idea how to fix your existing one also.
m a hanson
Well-known member
Have you googled a repair place for Dolphins in your area? That might be something to check out first, even though it's past warranty it may be easier to fix it then scouring the internet looking for another one. Also try the Maytronics site, perhaps their chat support can troubleshoot it for you. I also know some models have a reset button on the power supply too.
Amazon has the Triton in stock, you can have it by the 26th.
That's a great idea. I did email Maytronics. I did't even think of that. I will check for a reset. I didn't see one, but I could have missed it
There are a growing number of YouTube videos on how to fix them. They look simple to take apart and work on and might just be a affordable part.
- May 3, 2014
- 58,401
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Any error codes to go along with your issues?
I would pull the motor block out and make sure you don't have a restriction around the motor impeller such as hair or whatever could have bypassed the filter over time. Also look carefully at the drive mechanisms both sides to see if all is on track and restrictions. Any restriction of the aforementioned ones can and will strain the motor and the built in overload may kick in until it cools down.
Last edited:
BowserB
Silver Supporter
- Jul 29, 2018
- 777
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
My friend with a pressure side cleaner can't get parts for it. Sersee, for the benefit of others with robotic pool cleaners, can you share how you've used and stored your Dolphin?
Thanks.
Bill
Thanks.
Bill
m a hanson
Well-known member
The reset button should be right on the face of the power supply, so if you don't see it, then it's not an available feature.
Maytronics Customer Care
In The Industry
Hey Sersee,
We understand that you have encountered an issue with your Dolphin robot & it is no longer working - if no one yet reached out to you, we would appreciate it if you could send us a private message here so that we could take this matter further & assist.
& thank you @mknauss for the mention
Have a lovely day/evening!
Liz - Maytronics Customer Care
We understand that you have encountered an issue with your Dolphin robot & it is no longer working - if no one yet reached out to you, we would appreciate it if you could send us a private message here so that we could take this matter further & assist.
& thank you @mknauss for the mention
Have a lovely day/evening!
Liz - Maytronics Customer Care
Similar threads
