Brand new Circupool sj-45 shuts off after salt and cell lights turn on red
- Thread starter JeaniB
- Start date
clambert1273
Gold Supporter
- Jun 13, 2013
- 1,513
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
DeanP66
0
Very nice!!!!! Finally we have success. How is your salt reading on the unit compared to your test kit? They tend to be a little under what the Taylor K1766 says, but as long as the cell is happy, you should be good to go. 
- Jun 22, 2014
- 52,028
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Oly
Gold Supporter
Just tug the clear cover slightly to the left when opening. My setup is exactly like yours, no issues. You are an official PVC design and installation expert. 
OK perhaps you should have rotated the access to the top of the flow switch away from the wall but thats from my hypercritical observation.
OK perhaps you should have rotated the access to the top of the flow switch away from the wall but thats from my hypercritical observation.
I am happy to take any and all suggestions!! I just flat ran out of room. I purchased this shed when I had the much smaller Intex filter/swg. I need a bigger pool shed now!Just tug the clear cover slightly to the left when opening. My setup is exactly like yours, no issues. You are an official PVC design and installation expert.
OK perhaps you should have rotated the access to the top of the flow switch away from the wall but thats from my hypercritical observation.
DeanP66
0
Don't sweat it. That is perfectly fine. Only thing that might be nicer is if you could see the clear end of the cell easier without having to get down low on your knees. That is useful to make sure that the cell is making chlorine and the plates are clean and aren't accumulating any scale.
Don't worry about how the inside of your shed looks, as long as your pool is crystal clear! I'm just glad you got your new system working. 2 months in, I already love my SWG! So much easier!
That's what I do, and you better enjoy that pool now, you deserve it!!!!!!!!!
Holy Crud!! This can’t be good
This is the plug to my pump. It was plugged into a timer that I can control from my phone. The pump was running when I found this, but the timer was offline. I’m thinking there is no way to fix this myself. ??? I’m in Missouri, I’ll buy an airline ticket,.. help
This is the plug to my pump. It was plugged into a timer that I can control from my phone. The pump was running when I found this, but the timer was offline. I’m thinking there is no way to fix this myself. ??? I’m in Missouri, I’ll buy an airline ticket,.. help
That switch looks overloaded. Does it have a rating label somewhere on it saying its max current handling capability? I’m guessing is max 15A.Holy Crud!! This can’t be good
This is the plug to my pump. It was plugged into a timer that I can control from my phone. The pump was running when I found this, but the timer was offline. I’m thinking there is no way to fix this myself. ??? I’m in Missouri, I’ll buy an airline ticket,.. help
It’s also 15A so no headroom on the current capacity. You should change to a 20A switch if available. Might also want to check the rating on the outlet of what it’s plugged into. May be good to upgrade it (and the wiring supplying it) to 20A.
So, after my cheap 15A timer burned up, I bought this for a replacement. I “think” I can use this for both my pump and SWG. Can anyone offer up a good tutorial to show me how to install this thing?