Hi - after years of drama-free service my Pool Pilot 'CHECK SYSTEM' light is blinking red.
It now alternates between the usual display, ie:
Purifier 70%
1:32AM 87F ON
and this new message:
WARNING! Check/C
So I did the only thing I know to do: Menu -> "Test Pool Pilot" and see the following output:
Software V4.2
Cell = SC-48
Power level 1
Minerals=3200ppm
Temperature=97F
Cell=29V 3.5A
Anyone know what I might be looking at here? The pool seems to be clean and clear, but blinking red light can't be a good thing.
Thanks
It now alternates between the usual display, ie:
Purifier 70%
1:32AM 87F ON
and this new message:
WARNING! Check/C
So I did the only thing I know to do: Menu -> "Test Pool Pilot" and see the following output:
Software V4.2
Cell = SC-48
Power level 1
Minerals=3200ppm
Temperature=97F
Cell=29V 3.5A
Anyone know what I might be looking at here? The pool seems to be clean and clear, but blinking red light can't be a good thing.
Thanks