Z
Latest activity Postings Media About
-
-
Zzcmack replied to the thread Tristar VS 950 pump drive overload.this was the solution! when i did the factory reset it must have reset all my timer settings and speeds and i didn't put it all together...
-
Zzcmack replied to the thread Tristar VS 950 pump drive overload.alright, just made some fresh connections and eliminated the twisted pair wiring from all related connections. when i turned the...
-
Zzcmack replied to the thread Tristar VS 950 pump drive overload.the preset speeds are programmable, the pump itself can cycle through all of them and is responding appropriately to RPM adjustment...
-
-
Zzcmack replied to the thread Tristar VS 950 pump drive overload.the input 2 wires seemed firmly inserted but i did push them a bit more just to be sure. no change in behavior. i factory reset the...
-
Zzcmack replied to the thread Tristar VS 950 pump drive overload.Yep, when I turn the power on to the pump it says "Relay Control Initializing..." I've attached the wiring at the pump drive just for...
-
-
Zzcmack replied to the thread Tristar VS 950 pump drive overload.just tested with a multimeter, relays seem to be working as expected, with an audible click when i activate either "Filter" or "Low...
-
Zzcmack replied to the thread Tristar VS 950 pump drive overload.finally took it apart today, there was a little bit of debris in there but nothing too concerning. impeller and diffuser look good and...
-
-
Loading…
-
Loading…
-
Loading…
