Recent content by Yvonnef512

Thanks Allen. My husband is comfortable with electrical work and he was sure the contacts etc were good. He sprayed in some cleaner. The Jandy tech thought it was programming. Any place I can get a video on reprogramming? Right now in Austin you can’t get a pool tech unless you offer your first...

I did that and the intake slot is not sending the message to the actuator. I called Jandy and they said it was a programming problem and they would not walk me through it because I was not a licensed technicia.

Yes. We were operating the valve by the end spa controls.

I did that. The actuator on the intake, spot one, still does not work while the other one does. I called Jandy and the tec said he doubted it was the board since power went to the actuator and everything works but the actuator plugged into the intake slot. He thought it was programming and they...

Hi Allen. Thank you for your response. I have posted some pictures below of my Jandy Aqualink system. There is power to both actuators but only the second slot, the output side works from the panel button. We sprayed some contact cleaner and did a reset but nothing on the intake side. Does that...

Thank you for asking. We came through the freeze just fine. One JVA chewed up the diverter valve insert. I contacted Jandy as they have been great in the past. They gave no advice, just call a pool guy. The pool guys were all busy fixing busted pipes so I changed the insert myself. The other JVA...

I like fixing my pool myself if I can. We have an in ground 12,000 gal gunite salt water pool with pebble tec and a spa. My granddaughters and I love to play in it. We have a heater, we use a DE. It is all Jandy equipment.

We have a Jandy Aquapur RS system for pool and spa. During our Austin freeze we managed to not loose any pipes when the power went out and killed our freeze mode protection but both actuators had stopped working. On the first we had to replace the valve diverter and then it worked fine. On the...