Recent content by Wizard19

Thx for the response. We had a Jandy heater installed about 6 months ago. Figured out when it goes into freeze mode, the eCommand4 controller alternates between Pool and Spa mode (even though we don't have a spa), resulting in the waterfall continuously turning on and off in about 45 min intervals.

Trying to make sure all is operational as we approach 16 degrees tomorrow morning. Our Hayward eCommnd4 valve controlling the waterfall turns off after a while. I have checked the timers menu and it appears to be ok. I want the waterfall on constantly when the main pump is on high. (Have a two...

I researched the P40 quite a bit before purchasing one a several weeks ago. I had not heard any problems with the gearbox failing prematurely until your post. I have read some early owners mention the hose connector to the P40 body can break if you pull it out of the water by the hose and not by...

Hi Pesh - I am in Austin also (Steiner). We bought a Polaris Quattro P40 about two weeks ago to replace an old Pentair side pressure cleaner. The P40 runs on the same booster pump. It is not a "robot" and doesn't have any internal chip to control the cleaning path. But it works great. It has a...

Thanks for everyone's comments!

I did turn on the other two external bibs and had no problem with the pulsing. When we moved in 18 months ago, I had the PRV replaced at the street and the water pressure was corrrect.

Yes, I have that on the bib connected to the house.

Attached is a picture. The faucet/valve on the right connected to the PVC pipe going to the pool is the one that when the "pulsing" starts, I turn it down about half way and the pulsing stops. The hose is 1.5" and the pvc is 1".

We have a "y" connector to the external water bib at the back of house. I I can turn off the water flow to each side of the "y" connector. One side of the "y" is connected to my garden hose. The other side is connected to a valve and pipe that goes underground to the other side of the pool...

This appears to be what I am looking for. Looks like they are only available thru Leslies now. Anyone know when "Polaris Days" occur for a discount? Our Kreepy Krauly is on its last days and not really picking much up any longer. 3/22/21 ETA: Went up to Leslie's today and they do have the...

Water is "clear" but there is a slight haze in the water-more noticeable at night with the pool light on. We keep the pool open during the winter (adding heater in a few months). Pump runs about 6 hours/day. Haven't looked at the chemicals for about a month but gegerally on line except CYA is...

Moved into our home last summer with 3 year old pool. Had a service do the chemicals for 6 months but they didn't give it much attention. Been doing PPP. Water is crystal clear. Took in a water sample to local Leslie's Store this am and most readings matched mine (using TF-100). But they had TA...

Going into my second year with a Blue Diamond without any problems. I really like it. I had Polaris 280 for about 7 years and a 380 for about 5 years. We just had our pool resurfaced at the beginning of last year. Blue Diamond is so much nicer. Cleans our pool (16 x 32) in about 90 minutes...

Yes, I am planning to add Borates in the next several weeks. thx