Recent content by wickflair23

  1. W

    Aqua clarity bubbling on first dosage...

    What results are you seeing compared to not using it?
  2. W

    Aqua clarity bubbling on first dosage...

    Yes. Followed the directions to the T. In a 1 gallon windshield wiper fluid bottle. Added 2oz to my 410 gallon tub.
  3. W

    Aqua clarity bubbling on first dosage...

    Nope. Same suits we always use for tub only. Like I said zero foam until the clarity was added.
  4. W

    Aqua clarity bubbling on first dosage...

    Not sure if this is normal or not. Did a full Ahhhsome purge about 3 weeks ago. Really cleaned up well. After about 48 hours and two wipe downs, there was no more gunk. Water was crystal clear, but I never had time to use the tub. The wife and I used the tub tonight and I pointed out how low...
  5. W

    Sundance cartridge filter replacement options?

    Which ones Do you use? Do you have a link to those?
  6. W

    Sundance cartridge filter replacement options?

    Has anyone had any luck with alternative filters for their sundance? The name brand ones are pretty darn expensive, but maybe you get what you pay for?
  7. W

    Coming up on the first year of my Sundance 880, learned a lot along the way, but have a few more questions...

    This sure has been a learning experience and I have learned all of my information from here, so thank you all for that! After a lot of testing, I have found this strategy to work mostly well for me. -Once CYA level reaches 30-40 using dichlor I switch to liquid chlorine. -We use the two of us...
  8. W

    Starting up a hot tub

    Only 2-3oz the first 2 fills. This time I started with 7oz and then 2-3oz after that.
  9. W

    Starting up a hot tub

    Worked well adding every 10-20 minutes and testing the TA every 3-5 times. Aeration the entire time.
  10. W

    Starting up a hot tub

    I got a really good suggestion from a user on reddit. See below If you mix the muriatic acid solution–aka hydrochloric acid aka HCl(aq)–with water in a 5-gallon bucket first, you can probably add more at once. The important things here are to add the acid to the water and not vice versa, to...
  11. W

    Question about testing for TA and bringing it down.

    As I mentioned this is my 3rd fill. If I get TA down to 40-60, PH is fairly stable. Only have to add a few oz of acid every 3-4 weeks to knock it back down some. I am just sick of taking all dang day to get the TA in check.
  12. W

    Question about testing for TA and bringing it down.

    Not trying to lower it below 7. I want it at 7.4-7.7, but I have to add a boat load of acid to get my TA down otherwise I sit around 8-8.2
  13. W

    Question about testing for TA and bringing it down.

    Okay, good to know. Is there a safe amount or is it only a few oz? Like would say 8oz be okay? It took me all night to get it down and that is very time consuming.
  14. W

    Question about testing for TA and bringing it down.

    Yes, I have the speedstir.