Recent content by trudera

They have one called an "Encore". It looks like and Active 20 for half the price...

It appears Maytronics signed an exclusive privilege deal with a company in Canada called Pool Supplies Canada. I have been trying to find a S300 up here and no one carries them. My guess is this Premium is the S300. Can anyone help to confirm this. Thanks in advance

It’s a T-15

Rechecked numbers are 2300 78 30.6 3.06 99p -1600 al-1 r-1.40 Now getting solid check salt and solid inspect cell

Pump is usually running on low speed. No issues with no flow.

The cell is 10 years old. I have a timer on pump and and a separate timer on aqua rite. The aqua rite turns on an hour after pump and shuts down an hour before pump turns off. With the unit on auto. Here is what I get when I push diagnostics 2300 78 30.3 0.00 99P -0 AL-1 r-1.40

I have recalibrated my cell at least 4 times. I set it and the next day it continually drops so low that it shuts off and the lights are blinking. I used test strips and they state 3000 ppm and I had the water tested and it showed 3100 ppm. Any ideas as to what is going on.

My backwash is a solid line to my ditch underground so I would never notice a leak.

I do have a suction, went and put lube on all the gaskets. Have not run pump since doing so. I thought the hissing sound was a result of a bad spider gasket letting air back in through the backwash.

Folks, I need some guidance. When my pump shuts off I hear a hissing sound in the multiport valve and water draining . My gut instinct is the spider gasket is done. The filter is a hayward S244t, the multipost valve is an SP0714TC and the spider gasket key/seal is SP0714C. The key seal has...

That is great information. When I removed the multiport valve, and opened the drain on the sand filter, the water would not drain out. I had to suck the water out with shop vac. Once the excess water was removed, the unit was a little over half filled with sand. I removed the sand from the...