Recent content by traveller29

Hi Chris, Thank you for the reply, Pressure remains constant at the filter, Everything is working great except for the whizzing sound, I have come to the conclusion the bearings are shot. Anyway the pool is closed for the season. Will let you know how it works out.

Okay changed internal seal and the pump worked great but now 12 hrs later my pump sounds like a loud industrial pump, A weird wheezing sound but its still working fine....... Is it possible the impeller is now rubbing against the pump wall??? The reason being the impeller does have a slight...

Thank you, I hope your wrong about the flow restriction, I'm going to change all the "O" rings and gaskets and see if that helps my situation maybe the pump is pulling in too much air through one of them(a long shot), will keep you posted...

Skimmer at pump empties straight away valves are in open position, and now that u mention it the "O" ring where the housing meets the pump is a little loose...but would that really cause the pump not to prime properly and fail to circulate??? So if I change the "O" rings and i still have an...

Hi all, I recently replaced the capacitor on my pump but now i have no suction. Even after priming the pump it sucks the basket dry but no circulation from the pool. Also when i shut everything down water seeps from the bottom of the pump, why is it not building pressure?? The impeller is...

Thank you, will not you know how it works out.

Hi all, I have a 20 x 40 in-ground pool, The pump a 1 1/2 hp pent-air(centurion), just stop working...well it hums but no draw, it took everything apart, cleaned it it and spun the impeller( moved freely) Reconnected everything and it worked fine for 24hrs of continuous use, put it on backwash...