Recent content by tju22003

Update, when taking the photos i noticed the bad soldering job on the Thermistor. I re-soldered and now have power and generating lights! Look like the loose Thermistor was the issue

Here are photos of the board

Diagnostics are all 0000 except for salt reading of 2600. Back of the board has dark spots. Is GLX-PCB-RITE the correct replacement board?

I have an older Goldline Aqua Rite system. Model AQ-RITE, Circuit Board Part # 066012B-1, REV: B. The system is not generating. The board lights come on when the pump starts then all lights go out. The LCD has readings. When in Spa mode the no flow light comes on. Does that point to...

Thanks Sammy2, I am watching your thread also. I think our pools are similar both in size and with the spa spill over into the pool. Hopefully, the variable speed pump will not have to be run at a high rpm to achieve good water flow from the spill over. I will be interested to see what RPM...

I called Pentair support and spoke with a tech. He recommended the Intelliflow 011018. Basically pushed me away from the Superflow. How do the IntelliFlo and SuperFlo pumps differ? As for the automation, I am going the easy route and will upgrade the circuit board in my Jandy RS4 with the...

The bearings are bad in my 10 year old Whisperflo WFE-8 2hp 1.30 service factor. Rather than replacing the bearings, I was thinking of replacing the pump. I am paying .20c per KW. I have a 18,000 gallon salt water pool with built in spa. My water features are run by a separate WFE-8 that...