Recent content by sundaze

Thanks...I was wondering about the CYA being so low if that could have any effect on the slam.....I've got 2 gallons of stabilizer coming today. So I'll just continue the slam for another couple of days after adding the stabilizer.

Do I need to be more patient and let the sand filter do its job? I have never had the problem trying to clear up my water as I do right now. I've deep cleaned the sand filter, added 100 pounds of sand and have been slamming for the past 3 days. Brushing 2 time a day and running my robotic...

Thank you....

Yes the test was using the 1766 test kit here is the diagnostic readings average salt 300 temp 67 cell voltage 30.6 cell amp 0.13 desired output 43% instant salt -300 program code AL -0 Rev 1.58 Cell T-9 Switch set to Auto Power, Check salt and inspect cell led steady lite

Opened the pool a couple weeks ago and got everything cleaned and was is the process of balancing the water.... My motor was starting to make a fair amount of noise so I ordered bearing for a rebuild. The pump has not been in service for the last 6 days. Here are my test results right before...

I'm not sure if others would agree but when I go away I increase my pump run time from 7hrs to 10hrs and also increase my salt generator from 35% to 55%. Typically my FC will raise during this period.

I would not depend on the robot cleaning the walls....I still brush once a week. Sent from my SAMSUNG-SGH-I337 using Tapatalk

I have my timer set to run the pump twice a day for a total of 10 hours. I have the salt output set to 40% but during the hottest times I'll bump it up 50%. When the system shows the salt cell needs cleaning, which is based on run hours programmed into the unit, I plug 1 end and fill with...

We have zero regrets...except not doing it sooner...haha... The best investment so far has been the TF-100 kit. I also learned this past year that I need to remove the underwater lights and clean behind them early in the season after the water is balanced.....I had algae hiding there this...

Congrats on the build....I know you will be very happy with the pool....I purchased the same model back in the fall of 2013 I did not find this site until mid season of my first year. With all the info here I wish I had found it before I bought mine. Here are a couple of pictures of my...

I'm further up north in Maryland. My pool has been staying around mid 60's for about the past 6 weeks. About the first of Oct, when leaves started falling I made sure my pool was balanced then brought it up to shock level. I brushed and put cover on. I have been running the filter and swg, but...

Have you pulled out the lights and checked behind them? I had algae return a couple of weeks after a slam and when I removed my light I was amazed at what I found hiding behind...... Dave