Recent content by stroud_pool_owner

Hi there, yes it's been an interesting experience. I've found the opposite to you - having replaced the sand filter body, the old dome and o ring are working fine! I'm trying to work out how I can turn the old filter body into a garden feature...

Oh dear, more drama. I had the pump running for 5 minutes in every 20 while the air temp was -4C (24.8F) overnight and -2C (28.4F) during the day. Last year I had the heater coming on as well but this time as already mentioned the heater was not working. I came home one evening and thought it...

Thank you for this tip. I can't see this specified in the manual but I have the heating engineer coming out to check the heater and I'll ask him. Thanks again.

Sorry, the dome blew off so quickly I didn't get a chance to get my phone out... More seriously I have had a close look at the thread in the last 2 hours and I really can't see any damage to it. I have just screwed the dome back on with 6 rounds of PTFE tape on the thread so I'm not keen to take...

[error]

Hi Bperry, I'd secured the lid fully hand tight before it blew off. I was amazed that the threads had not been completely wrecked. However the lid still screws on fully tight. To my mind, if the thread is good enough to screw the lid on tightly, and the O ring is new and properly greased, and...

Well, I thought I was on top of this issue. Having replaced the bulkhead fittings the leak had reduced to a tolerable drip.... Unfortunately I then committed a cardinal sin. Set the multiport valve to backwash and turned on the pump. I had not opened the backwash pipe stopcock. The water...

Thank you both for advice. I had not realised the bulkhead ring had a curvature to it. I'll check that. Also I'll get a couple of new bulkhead nuts. I didn't mention in the original post that I had no tools big enough to grip them so ended up using a large G-clamp to grip them! Having read...

Happy Christmas! Any help much appreciated. I had to replace my multiport on my TR 60. In removing the old one I loosened the bulkhead nuts. So I thought it would be good opportunity to replace the bulkhead O rings. And while I was at it take all the sand out of the filter and give it a wash...

Hi All, My multiport is dripping and it looks like there are 2 tiny cracks in the body. I'm guessing the only option is to replace the multiport, but if anyone has any other solutions please let me know. Thank you for your advice! Video of the problem: [

Thank you for this advice. Forgive the wry smile. Here in England we are not blessed with extended periods of warmth. My pool temp has not been higher than the daily peak temp for all but about seven days this summer!

I think this is another frustrating issue with pool care in the UK. Muriatic acid is not easy to come by and isn't available from pool stores on line. However it is available from industrial chemical providers so I will try to get hold of it from them. Thank you very much for this advice.

It seems to be taking a lot of acid to correct the TA. I have put in about 4kg of pH-. The pH is down from 8.2 to 7.6. I have a home made aerator going 12 hours per day. But the TA is stuck on 200. Keep going with the pH- I guess.