Recent content by rp7777

my vac is attached to my skimmer. The skimmer motion is attached near the end of the hose closest to the vacuum. The barracuda was my first vac and it always got stuck in one spot so it does not work for me

I’ve been through 3 mx8 over the years and have replaced parts in between. I also have a skimmer motion to keep the surface clean. My pool is screen enclosed so no large debris enters the water and it’s a 13 x 19 ft pool. Also my vacuum lives in the water, I never take it out. My vac does what...

Such a disgrace that nothing lasts by design.

Which one?

I have had 2 zodiac mx8 vacs and I like it when it works but I’m tired of either buying parts or just replacing the unit. I have. 10k gallon pool with a screen enclosure. Any recommendations on a vac that won’t get stuck in corners and doesn’t require parts replacement so frequently?

Kreepy krawly gets stuck in one of my corners so I can’t use it. Is the rebel a random moving vac so if it get stuck in a corner it can eventually back up?

I have zodiac mx8 pool cleaner that works great when I’m not changing parts. I’m getting tired of this so does anyone recommend a suction side cleaners that are reliable?

Well that is what I am asking but you are telling me to look which is what I already did. I’m asking if someone knows if a such metal brush exists

Not pressure washer powered. I’m not draining my pool

I would like to scrub off black algae. Is there a pressure washer powered rotary metal brush that exists?

I use the tfp test kits with the drops. No test strips

I have low calcium sitting at about 125 and I need it to go up to about 250. I had added what appears to be the correct amount of calcium per the Pool math calculator on 2 separate occasions over the past couple of weeks but the 125 range remains the same. Which brand on Amazon do any of you...

Issue has been resolved and there are no air leaks or water dripping under the skimmer. I installed a new line on the back skimmer port and capped the front one. The line line wraps around my deck in the grass. I then joined it with the existing run before it turned under the deck.