Recent content by RodB

Hello all, I have two JVA’s that are making sound and vibrating but the valve is not moving any ideas? Just started this season after opening. The valves are only 3 years old. Thanka

Bought same connector 100 of them ugh used 1 worked perfect sensor now working after you push in the non stripped wires you use pliers to squeeze the red part of the connector the wires will be connected. Only posting for those who never used these as myself.

Looking for some help from you aqua link experts in the community! I got an open notice on the app traced the wire from the sensor and found a black wire not connected. The question is what the heck are those red things that appear to be holding the wires together. Do I need those to...

I like my aqua link but sometimes they miss very simple things. They should have a setting for filter pump speed setting in service mode. That way it won’t follow it mess up the programmed schedule. When I regenerate I do not want to follow my schedule because I have some hours off and some...

Please do what you get time. I’m not sure what you mean. Thanks

Hello all, so I have a variable speed pump it’s scheduled via aqua link. When I regenerate DE I want my pump to run full speed for 24 hours bypassing my schedule. Is there something simple in the app to allow an override of the schedule to accomplish that. I do t want to mess with my...

Thanks for the suggestions. I think I like the idea jim suggested use one spa pump to control just the spa and use a jva to switch from one set of jets to the other. Use the other spa pump to control the fountains and slide using JVA’s to switch from fountains and slide. I’m so glad for all...

The spa pump on the left controls half my spa jets and the two deep end fountains the right spa pump controls the water slide and a sun shelf fountain. The idea of two spa pumps is I can control the left and right side jets with one and back and bottom jets with the other. I guess I could use...

See photo

Where do I connect the main drain to the water feature pumps can I connect it to both of them? Thanks

Well back to square one I tried running the filter pump in spa mode without heat in order to return water from the pool to the spa to compensate for the slide pulling water from the spa. The spa still drained I believe it’s because more water in pulled and retuned to the spa. Ugh back to the...

I got it I just need to run spa mode no heat whike using the slide or fountains that way the spa pulls water from the pool. I should have been able to figure this out without a post. Thanks

Yes they pull from the spa however the filter pump controls the spa mode in order to use that to return water to the spa I’d have to run the spa which I’d rather not. Thanks for the reply

Hello all, I use two separate variable speed pumps one for half my spa and two fountains and the other for half my spa, one other fountain and a water slide. With that said I use JVA’s to control the fountains and slide. While using the slide water gets pulled from my spa by the pump to provide...