Recent content by Rapmon23

I forced water into that line with the hose and didn't see any water bubble up.

Thank you for that info for the pump and filters! Will look into those. As far as the capped pipe to the right and the uncapped pipe to the left--that was an old gas line for a gas stove that has since been changed out for electric. The uncapped line is connected to nothing on the other side...

Hi @proavia any chance you're able to identify based on those pictures?

It's a Waterway filter, not sure which specifically, with 4 cartridge filters. Here's some pics of the pump, filter, the plumbed hole in the wall (approx. 0.75" diameter) and the valves that are roughly 20 ft from that wall of the pool.

I've filled out my signature with what I could for now. The sticker on my pump that had the model info has worn off. I've only taken over this pool a couple of years ago and have no idea when it was built, however the plaster/pebbletec doesn't look all that old, but it's hard to tell. I do not...

It does not have an autofill that I know of. I have to use the hose to top it off every 3 days or so in the summer. I didn't do the diluted test you linked, just the regular CYA test. I'll try that one thanks!

Thank you for your help on this! I'm using the Taylor K-2006C test kit that's recommended here, so that's how I determined my CYA. I am not sure when the pool was last drained completely as I don't know what the previous owners did. I do have a water softener and tested the hose water I use to...