Recent content by pxranger

  1. P

    PH question

    That’s kind of what I was hoping to hear. I’m waiting until it hits 8.0 then I’ll add MA to 7.0 and repeat until no longer necessary. The last time I did it my TA was 100. So the MA didn’t lower the TA. Any other way I should try to lower the TA?
  2. P

    PH question

    Last week my PH was 8, I added the appropriate amount of MA to bring it to 7. It has been steadily climbing, today it’s 7.8. I have a poolskim that is needed to pull floating debris out and it works great. It however aerates the water which I am assuming is the cause of the quick rise in PH...
  3. P

    New Pool Owner

    As far as target, what should I aim for? 50 seems popular. I ordered a standards set as the "see the dot" method is somewhat subjective. Are there other CYA tests that work differently?
  4. P

    New Pool Owner

    I posted earlier about my foray into pool ownership this year. Added CYA a few days ago. Tri-chlor is done as of today. Took my readings with my new test kits and these are the results: FC - 5 CC - 0 PH - 7.6 TA - 100 CH - 140 CYA - 50 - 55 (Taylor Kit vs. the TF-Pro) So if I understand...
  5. P

    New to Pools

    Sorry, CC - 0 TC - 4
  6. P

    New to Pools

    Tested everything except CYA as it is still disolving FC-4 CC-4 PH-7 TA-100 CH-150 Alkalinity is high, I assume my PH will rise over the next few days. So if I understand correctly, if TA stays at 100 or more then I just wait for PH to rise or use aeration to speed it up and then use muratic...
  7. P

    New to Pools

    Maybe they are good, my target was the issue I think. I added a 4lb bag of CYA with the sock method and 90oz of Muratic acid. When is the soonest I can test again to get an accurate assessment of the additions?
  8. P

    New to Pools

    The TFP app calculations for decreasing PH are waaay off.
  9. P

    New to Pools

    The shock is Biogard burnout 73, The Taylor kit arrived today, Unfortunately Amazon sent a K-2005C instead of the K-2006C that I ordered. Since I ordered the TF kit, I am keeping this on so I can at least start testing. PH - 8.0 (at top of range so maybe higher?) FC - 5 CC - 5 CYA - Range goes...
  10. P

    New to Pools

    So we bought a pool last spring, It was installed last fall, filled and covered. About 3 weeks ago we opened the pool and I was overwhelmed with the vast amount of chemicals and other pool details that I needed to learn. Like most everyone I went to the local pool store and was sold Tri-Chlor...
  11. IMG_3972.jpg

    IMG_3972.jpg