Recent content by PoolStored

Read the section on "pump runtimes" here: https://www.troublefreepool.com/wiki/index.php?title=Pump_Basics#Pump_Runtimes

I see your signature. Thanks! You have a variable speed pump. No reason to run at high speed. You run your pump for a reason. Read the section on "pump runtimes" here: https://www.troublefreepool.com/wiki/index.php?title=Pump_Basics#Pump_Runtimes Make sure she knows how to decode chlorine...

You have low CYA. I have no idea what cell you have or output capacity or pump runtime. It is highly unlikely, even if you run a 2x cell size your pool volume you will not exceed SLAM level FC running for 24 hours at 80%. Chorine is king. Creating chlorine will stave off any algae growth you...

Pool Essentials Liquid Chorine from Walmart. Sure, you can up the SWG % tomorrow. Are you running 24/7? If so, set it to 80% output. Still need your signature to know your cell and output% and pump runtime to help you. Fill out your signature.

You have, at least, proven the reliability of the test. Good Job! You will get there and the angst and time will greatly reduce. In 6 mos., you will say pffft, testing? Easy.

Your best bet on short notice is Pool Essential Liquid Chlorine at Walmart.

Welcome to TFP!!! :shark: No way to tell. Either way it needs to be replaced.

Not worth another test. It is a learning curve, but it gets WAAAAAY easier. Fill out your signature when you get a chance. https://www.troublefreepool.com/wiki/index.php?title=Create_Your_Signature

Dude, you didn't print out or read the OCLT instructions. Really need FC to be greater than 3ppm. Do you have liquid chlorine? Then follow this from the OCLT instructions: If your FC is less than 3 ppm, add enough liquid chlorine to achieve 3 ppm FC, wait 30 minutes, then retest with the...

Turn the breaker to the pump OFF.

Turn the % to lowest. Wait 30 minutes with pump running, then do your first test.

One time event will not be a problem. No. Do not add it. We do not recommend algaecide.

What SWG do you have? Do you have automation?

WHEW! Great! Fingers crossed. Print out the OCLT directions and follow them. Tests must be AFTER sunset and BEFORE sunrise. Use weather on your phone for the times. Run pump 24/7, or at least 30 minutes before the tests.

For a 20K pool, 8-10 is fine to start. You may need more or less.