Recent content by Poolecw

  1. P

    Dropping water level

    My water level drops about 1/2 inch per day. Is that typical for evaporation or should I be looking for a leak?
  2. P

    Multiport rebuild kit

    Yikes. That's almost the price of a whole new unit.
  3. P

    Multiport rebuild kit

    I have a decent amount of water leaking from the top of my Jandy top mount multiport valve. Can anyone recommend a source for parts? I went to my local pool supply, but it was a total waste of time.
  4. P

    Leaking multiport

    The Jandy multiport valve on my filter is leaking from somewhere around the top . Is this a common issue and are there rebuild kits available?
  5. 20240330_083929.jpg

    20240330_083929.jpg

  6. P

    Increasing pH

    Do you prefer Soda Ash/ Washing soda or Borax to increase pH? Or is it matter of whichever one is cheaper?
  7. P

    Vacuuming up dead algae

    Is it ok to vacuum a little dead algae and thrn backwash? Or should one always vacuum to waste?
  8. P

    Jandy TruClear flow rate reading

    I know that the TruClear has some type of flow rate sensor because it will only generate if above 20 gpm. Does anyone know if it is possible to get flow rate readings out of it? This would be a very beneficial feature to have.
  9. P

    Jandy ipump01 and JEP-R controller

    Is it possible to use both the ipumpt01 and the JEP-R on the same VS pump? I really like the idea of the ipump01 for better customization. However, I do not like that you loose the ability to make manual manipulations without having a smart phone around.
  10. P

    Run schedules

    Is there a strategy or preferred scheme of running your pump? I'm installing an Jandy iqpump01 today and will have the ability to fully customized run schedules. Until know, I've typically ran the pump late evening and into the night on low RPMs. Would there be advantages in running for...
  11. P

    To robot or not to robot?

    ....that is the question. I'm a third year pool owner. Our installer included a Polaris TR28P pressure side cleaner with Polaris PB4-6 booster pump. It does a decent at picking up debris, but lately it seems to want to get stuck at the base of a wall or fly around in the middle of the water...
  12. P

    Plastic items becoming brittle

    I'm not sure how she maintained her pool last year. I do know that last year was Year #2 since new. She simply set the SWG at 100% and let it ride.
  13. P

    Plastic items becoming brittle

    A friend of our called me over to help with her SWG system. I posted about that problem in the appropriate forum. While there, she told me about another issue that I'm going to share here. Various plastic components in her pool is deteriorating at a really fast rate. She had gone through...
  14. P

    Helping a friend out with Hayward SWG system problem

    A church friend of ours asked me to take a look at her SWG. When she opened it up this season, the reading on the AquaRite panel was low she she began adding bags of salt. She ended up adding 18 bag and didn't get the reading to change much. So she stopped there and asked for help. When I...
  15. P

    Where to buy Jandy iqpump01

    Any advice on where to purchase the Jandy iqpump01 controller online? I'd rather stay away from Ebay.