Recent content by Phack1

The HTH uses the liquid. I’m using a bottle I bought end of last year but exp date is 5/26 so I figured still good. Kept inside at all times except when testing. I wanted the CYA lower anyway, just annoyed I probably over bought chlorine for the SLAM. I’ll use 30 as my level and go from here...

That’s why I thought it should’ve been lower when I did test before I Slammed. About half was replaced so 30 should be my number based on last year’s number, correct? I have the Taylor k-1515 FAS-DPD kit I’m using right now, have the k-2006 on order, I’m using the comparator tube for CYA test...

Before starting SLAM I checked CYA and it read 70. Used Taylor reagent, exp date of 5/26. I thought that was strange, since I ran at 60 all year last year, drained half of pool water off for winter and pool refilled this year with rain and a couple thousand gallons from well. I retested with...

I haven’t been logging, I’ve just been plugging my fas-dpd results in to figure how many gallons to add then redoing each test. I know I’m close but not there, still have dead algae on the bottom. My little bot just isn’t up to this I’m afraid. My water is pretty darn clear though so soon…soon.

I just had to post because I’m so thrilled! One week and 32 bottles of chlorine later and my overnight FC loss was 1.5 with cc of 0.5 My husband commented last night about how I was burning through chlorine so I can get him off my back soon 🤣.

Perfect! Thanks so much, I will do that. Thanks for the link, I’ll check it out.

Hello! First time poster here. I’ve been trolling the forums for many years and “took the plunge” and joined🤣. We have just finished setting up a new 26’x52” intex. It’s been a very slow process (love how the box says 1hr set up). Currently, there is about 1-1/2 feet of water, I’m guessing...