Recent content by peterbwf2

Thanks for the advice! No algae issues to speak of. I have not found any significant debris beyond the intex skimmer basket so it seems like that's been doing a good job. I checked and tightened all hoses and no issues there. I have not opened up the multiport yet, so I'll open that up and make...

18x52 Intex XTR Pool with SF 80110 Pump has been installed for about 3 months. In the past couple of weeks the PSI has dropped off to approx 2.5 in Filter Mode only. If I switch to Backwash or Rinse, the PSI is still approx 6. I've checked the filter basket, impeller, intex skimmer and all pump...

Awesome, thanks, I'll check that out.

Yes, 12x12 patio blocks. It looks like the feet moved back slightly on the blocks during filling after 1 foot of water had been put in. From what I've read elsewhere it sounds like that is normal. I did go around while it was filling up to 1 foot of water and recenter/straighten any that had...

Hi there After setting up and filling our above ground pool I shocked it but apparently not everything else was quite in balance and free chlorine was zero. I shocked it again after balancing everything else out and now free chlorine is 10. I know I need to now wait for that to reduce below...

Hi there I have an Intex XTR 18 x 52 inch pool that I finally got put up after several weekends of leveling and prep. It's not perfect but it is under an inch out of level (approx 3/4). The only odd thing that I can't seem to find examples of people with the same issue is that all of the legs...