Recent content by paulietools

So after thinking about this for a while I am wondering if this fitting had some sort of spring loaded pressure relief feature? The screw fits in to the hole in the center and it was found behind the fitting in the pipe. We have 4 jets into the spa and then this fitting so just thinking maybe to...

Sorry for the delay, I was on vacation. Heres the picture of the backside. It was just pushed in, no threads but it is approx 1.5 inches

I am hoping some one can look at this picture and tell me what I have so I can look for a replacement. We have a spa attached to the pool and in the spa are 4 jets and this eyeball fitting. I have had to remove all of them to clean out debris from behind them. When I removed the eyeball fitting...

Thanks for all the good information. I will order up some of the proper sized jets and see how it goes.

Yes that is the pump but it is 1 1/2 HP. Hopefully these pictures help a bit.

Oh ok. I will have to look for that bit of information.

Ah. Sorry for being so slow to grasp your question. I will have to get the info when I get home tonight. The motor nameplate is the one thing that I have not taken a picture of.

Thanks for the tip. I think I will order a few to see if they will work. My apologies about the question. We don't have a jet pump for the spa. It all works off of the main pool pump. it just depends on how I adjust the valves for the water flow direction. There are 5 jets in the spa (the...

And here is the second question. This is a picture of the other nozzle in the spa. It was blocked with a rock and when I took it out I found this screw behind it. Can anyone point me in the right direction as to the purpose of this nozzle? Does the screw belong with it? Was there some sort of...

So I have looked all over the nozzles and I can't find any identifying marks or numbers. Hopefully the picture helps.

Yes the nozzles. Two of them are cracked/broken around the nozzle and 3 three of them are missing what looks like a sleeve in the center to reduce the nozzle opening.

Thank you so much!! Thats exactly what i needed to know. I was able to get the venturis out and clean out behind them. So now my next question is where do i get replacements. I have searched the web but having no luck. I will post pictures later when at my computer.

Hi all. We just bought a house with a combined in ground pool and spa. The info on the setup is as follows: Pool is 35' x 16' gunite built in approx. 1982, 3/4 HP Hayward pump with Pentair DE filter and chlorine injector. The spa is approx. 6' x 3' kidney shaped with over flow into the pool...