Recent content by offshorebound

Will do

I think it would be too costly to change out the pipe now. I asked about added a blower and the PB said it was to late. Just trying to figure out what to do.

-Are you seeing bubbles when the jets are on? Yes, but i don't feel it has enough force. -Are you running the VS at full speed? I was running 3450rpm but a rep from pentair said not to run it that high due to my filter size -What is the filter pressure when the spa jets are...

No water was coming out pool returns or bubblers.

- Can you turn off individual jets? Mine turn and you can turn them off individually. This does not help. Turning off 4 jets and only having two jets does not increase pressure - Are you sure the actuators completely block the pool returns when in spa mode...

Hello all, I'm just finishing up a new construction pool/spa and am not happy with the pressure from the spa jets. I have discussed this with my builder and it seems he has no ideas on how to increase the pressure. I have the 3hp intelliflo pump, 6 jets, the plumbing to the spa is 2" and the...

They are not easy to remove. They are rubber plugs https://www.amazon.com/PoolSupplyTown-Eyeball-Hydrostream-Fitting-Opening/dp/B01LYD9GGF/ref=sr_1_38?dchild=1&keywords=pool+eyeball+return&qid=1605052819&sr=8-38...

This was a picture from awhile ago. The pipes sticking up have been cut and are flush with the spa The pipes (jets) you see inside of the spa are not threaded. All the PB did was add caps to the end of the pipes inside the spa

Hopefully, you can tell from the picture. The pipes are just pvc pipe with caps on the end. I'm not sure those jets from amazon would work since they are threaded.

Hello all, I'm just finishing up construction on a gunite pool with attached spa. My spa "jets" if you can call them that are pvc pipe with caps on the end. Does Waterway or any company make jets you can screw into the pvc pipe?

Hello all, My new pool build is almost finished and I'm looking for a stone cleaner and sealer to be used around the spa. I believe I have ledger stone. I read in another thread to use DryTreat Eff-Erayza for a cleaner. Is this still a good product. What is recommended for sealing this?