Upgrading spa jets

It depends on what kind of jet the PB installed. More than likely it is a standard venturi TEE and the jet nozzle is already installed in the tee so the only thing you need is an exterior eyeball or whirlybird.


But to make sure, post a picture of the exit pipe end.
 
It depends on what kind of jet the PB installed. More than likely it is a standard venturi TEE and the jet nozzle is already installed in the tee so the only thing you need is an exterior eyeball or whirlybird.


But to make sure, post a picture of the exit pipe end.

Hopefully, you can tell from the picture. The pipes are just pvc pipe with caps on the end.
I'm not sure those jets from amazon would work since they are threaded.

IMG_3163.JPG
 
So why hasn't the PB finished the installation?

The pipes on top of the spa wall are probably air intakes and require installation of valves. The pipes in the spa wall, should be threaded. Are you saying they are not threaded?
 
So why hasn't the PB finished the installation?


The pipes on top of the spa wall are probably air intakes and require installation of valves. The pipes in the spa wall, should be threaded. Are you saying they are not threaded?

This was a picture from awhile ago. The pipes sticking up have been cut and are flush with the spa

The pipes (jets) you see inside of the spa are not threaded. All the PB did was add caps to the end of the pipes inside the spa
 
Last edited:
Have you tried to remove the caps? How are they attacked to the pipe if there are no threads? Are they rubber plugs?

If they are 1 1/2" pipe without threads you can use the slip eyeballs.


They also come in 3/4".


But this will only allow you to direct the flow.
 
Have you tried to remove the caps? How are they attacked to the pipe if there are no threads? Are they rubber plugs?

They are not easy to remove. They are rubber plugs



Thank you for the suggestion. I will try this and see how it works. I'm just looking for something with more pressure
 
The eyeballs won't make the jets stronger. That is determined by the plumbing design and the nozzle size in the venturi tee.

Do you know the pipe size going to and from the spa and the tee nozzle size?

Also, why are there rubber plugs in jets?
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.