Recent content by NineAcre

  1. N

    Coverstar Autocover winter storage

    I have a IGP with a Coverstar autocover and also have a mesh winter cover. Last year the pool company rolled-up the cover in the vault and when the pool was opened in the Spring there was quite a bit of mildew on the cover. Are there any suggestions on what to do that might help mitigate this...
  2. N

    High Pressure in Filter

    What's TSP?
  3. N

    High Pressure in Filter

    Is it possible to run the filter without one or more cartridges installed to verify whether the issue is the heater/lines/etc? Also, I read something bout needing to degrease the filters - any suggestions on that? I rinsed them and they were visibly dirty.
  4. N

    High Pressure in Filter

    I have a Hayward filter cartridge (4 filters inside) which is a little over a year old. Pressure when new was in 20-22 PSI range. It went up to 30 PSI and I just cleaned the 4 cartridges. It's still reading 29 so I wondering what else I need to do. Pool is 22,000 in-ground with pump about...
  5. N

    Adjusting percentage for Hayward AquaRite - Automated possible?

    I saw some Haywood products advertised like the Haywood CAT 2000. Do these work? Seen mixed reviews.
  6. N

    Adjusting percentage for Hayward AquaRite - Automated possible?

    Are there automated SWGs that adjust the "Desired Output %" based on measured FC levels? I'm finding it tedious to have to manually adjust the "Desired Output %" knob and am guessing about what to set it on. Right now its at 70% and the FC is 10 PPM - I just dropped it down from 85%. I have a...
  7. N

    PH testing problems

    The people in the store didn't seem to know what the tolerances of the BioGuard tester was or how it was calibrated. I couldn't find anything on the web either about calibration of the BioGuard system but I suspect something must be required to ensure it's giving accurate results. I do have a...
  8. N

    PH testing problems

    I have a 20,000 gallon in-ground SWG pool and a 500 gallon BullFrog hot tub. I can't seem to find a consistent way to get a read on the PH. Here's what I've tried: * Pool and hot tub both have a PH-in that provides PH data. It says the hot tub is low PH around 7.1 and the pool is okay...
  9. N

    Autocover Typical Cost

    I got a bids for $13.6k, $16k and $25.5k for a Coverstar for 40x20 pool
  10. N

    Swim Jet Question: Bade Jet Sport 2 versus Riverflow

    Thanks plat - any other experiences from the TFP community?
  11. N

    Swim Jet Question: Bade Jet Sport 2 versus Riverflow

    Does anyone have suggestions for a swim jet system or experience with them? My PB is suggesting the Badu Super Sport 2 but I'm also interested in RiverFlow. We've reached out to RiverFlow and they've been difficult to deal with. Need to decide soon so help and user reviews appreciated.
  12. N

    Shotcrete versus Gunite

    Thanks for the great feedback - we're going with Gunite
  13. N

    Shotcrete versus Gunite

    We're getting quotes for a new IG pool about 20'x40' and some are proposing shotcrete and others gunite. The shotcrete bids are coming in about $20K higher than the gunite bids. Any opinions on which is "better" or what I should consider? Thanks!
  14. N

    Advise on solar covers for rental house

    A solar color costs maybe $500-$1000? I've only gotten auto cover quotes for CoverStar and they're coming in around $15,000! I'm looking for an intermediate option. Also, my expectation is that there's no way renters are going to deal with taking a color on and off unless it's just a push of...
  15. N

    Advise on solar covers for rental house

    In reading through the posts, it seems most people find solar covers a great way to save energy on pool heating and keep the pool cleaner with less debris. We're putting in a new gunite pool about 20' x 40' and the house will have weekly renters during the summer. I can't see renters wrestling...