Recent content by Myburneraccount

I wanted to update this thread in case someone else runs into the same issue. I had two failed thermoregulators in rather short time while obsessively maintaining pH in the ideal range. This led me to look for other possibilities and found that the bond wire to the heater was very loose and a...

That makes sense. I have a versaflow bypass so the only time water goes through the system is when the heater is on. Aside from the chemistry, any downside from the lack of ambient water flowing through after spa use? TA is only recently at 110 since I’ve been out of town for the past month...

Yes can take pics tomorrow during the day. Anything specific you would like to see?

Is the thermoregulator damage likely related to the scaling?

https://troublefreepool.com/mypool/DJBK3k6

No pool is SW with a truclear system. Can you please expand on what you are thinking around this?

I use pool math and tftest kit. Is my pool math log not syncing? Of note, I typically log results, add chems (don’t always log acid addition), and don’t retest after adding suggested amount. I also don’t always log the addition even though I always add acid following testing. That’s why my log...

Hello everyone. Have had a Jandy JXi 400NG with versaflo installed for about a year. Recently had very loud banging/knocking occurring when the gas heater ignited. My PB has come by to service the heater and said that 1) the thermoregulator had failed and 2) there was a large amount of scale...

Hi, sorry to resurrect this but I have just installed a 3 way below my blower. If I do a 30% vent opening, I get a loud whoosh, short of a whistle from the venting air. Have you solved this in any way? I am thinking of adding a in line muffler but I'm sure there is a better way.