Recent content by Monkminder

Hi @Rangerman . Obviously, it could be a number of things, including a leak/crack in the underground plumbing. However, there are a number of things you can look at first. I recently was getting air in my returns. I ended up finding a union that was loose. Keep in mind it wasn't loose...

Thanks for all the replies. Much appreciated!

I am looking to do a DIY pool automation controller. I have researched fairly extensively here and elsewhere. I want to create a build list and create a visual diagram of all the electrical connections, both high and low voltage. I am looking for advice on layout software for electrical...

@Jimrahbe not in the least! I am not easily offended. I did snicker at your comment (y)

Thanks for the replies. I was basing my initial research on the anode rod that are in water heaters. I figured if it’s something that would help with tap water, maybe it’s required/smart to use something similar on a pool line. Thankfully @Jimrahbe , my ex and I have a continued solid...

Hopefully this is an ok area for this question. Still new here. My ex wife has a SWG and with my reading here and elsewhere, I was curious to see if you pool contractor put in a sacrificial anode. They did not, so I suggested she may want to think about it but check with her pool maintenance...

Hi there. I just received my test kit from TF. I have been using the Blue Devil CYA test kit (with the aggitating stick attached to the test vial)up until this morning. It has been giving results between 35-40 for the past 3-4 tests as I continue to balance my water. I used the TF CYA test...

Greetings TFP! I’ve been a pool owner since 2001. It was built in 1956 to the best of my knowledge, 18’ x 36’ and 9’ deep at the deepest end. I have kept the original stainless steel Pentair SM/SMBW 2000 series canister filter (rebuilt the backwash about 10 years ago.) Whisperflo 2 speed...