Recent content by MJuric

I believe because of really poor installation. A couple of the leaks were pull aways and or cuts to large around openings. Last one we had fixed by another company was because the liner had an opening by the light. The original installer just placed a small piece of vinyl over it. I happen to...

No, no idea where the leak is. Been fighting leaks since we got a new liner a couple years ago. Keep patching and finding them, but still seems we have more. Plumbing was pressure treated this year and found no leaks there.

How low is too low? We apparently still have a leak and level continues to go down slowly. Wondering how low is too low and should I add some water before we start to freeze? Thank you.

I can feel the water flow out with my fingers so it's a significant leak. This place will not stand behind their work. We had a hard time getting them to pull the liner back into the track when it kept coming out right after installation.

We had a new linear installed in our pool two years ago. Not a great job in my opinion. Liner kept pulling out of the to track, leaks etc. This year still more leaks. I found a spot near the light where it looks like the liner had either turn or pulled out from the light ring. It's a...

I am wondering if tree growth may be a contributor. Yes have grown more over the pool. Maybe trimming them back might help.

I do an overnight drop after I shock. Typically I go with clear water, no drop for two consecutive nights. Yes I have fallen below 3.5 a few times but not for long. Typically I will test at night and adjust. I've had a few nights where I've been below 3.5 so from morning to evening it gets...

Tf 100 and I chlorinate manually adding liquid chlorine daily. I can not say that I never fall below a certain level FC but I've been very different this year and have general been on top of FC levels. Once or twice falling low, 1 ppm or so for less than a day.

But why am I having this issue the last two years and not the previous five? Nothing has changed that I can tell. If anything I've taken more care, watched chem levels, more regular vacuuming etc than I did the first two or three years to be certain. Getting a robot vacuum is certainly an...

I'm manually vacuuming with a brush...as you can imagine not fun doing everyday. It was my understanding that 3 to 4 hours a day is what you should be running. It has only been the last couple years that this has been an issue and I've been running 3 to 4 hours the entire time.

Current numbers. FC 3.5 CC 0.5 PH 6.8 purposefully running low to descale TA not tested since I started running lower PH. CH 225 CYA 35

I've had this pool for seven years now. My frequency of vacuuming seems to continuously go up. Last year I thought I had an algae issue so I shocked it. Still had the problem. Shocked again and left it shocked for quite a while despite otherwise clear water and no overnight drop.... Same...

Last year I fought PH all year. This year same thing. Got TA down to 110 and PH down to 7.5. tested today and PH is off the chart 8.2+ and TA is 150. Im also thinking this probably has something to do with the rough feeling liner. Current numbers. FC 3.5 CC 0.5 PH 8.2+ TA 150 CH 225 CYA 35 I...

Still struggling with this. I went thru the SLAM process again and thought I was being very conservative. Left it at SLAM levels for a couple days after having a success over night drop test. I let the levels drop back down to normal levels. Didn't vacuum for three four days and the attached...