Recent content by Miro

I was thinking the same, but this is the actual situation: the transformer has 2 wires as output. all lights (6) cables terminate at the transformer box. Every LED light cable has 2 wires (black and white). All 6 black wires are connected to one output, and all 6 white wires are connected to the...

I have replaced the old transformer with a new Intermatic PX300S. Just in case the wire length would produce a drop in voltage, i have connected it so it runs 13V output to the lights. Unfortunately, there was no improvement nor any change to the functionality of the lights. 4 lights are still...

Thank you all, the transformer is about 10 years old as per the neighbour. Looking at the Hayward LED manual, it suggests the similar size bulbs are either 13W or 23W. 6X13w=78W Since the price difference between a 100W and 300W is not significant i might as well get the 300W one, having in...

Thank you, my lights work exactly the same way, switching power changes the color and pattern. i will try to disconnect and see what happens. On that note, would it be safe to connect all 6 lights to one wire (yellow or black)?

Thanks Yippee, i do not know the brand and as per my pool tech i would not be able to tell unless i pull one from the wall, which would be the last thing i want to do. Is it possible that every light has it's own controller? As i do not see any particular controller box, just the transformer and...

i have tried with the breakers, but it does not make a difference. Not sure where the LED controller is. I see the transformer which is converting power is 100W, which in my opinion is not enough for 6 lights. The thing that confuses me is that it all worked fine before. Do you think i should...

Hi, i have recently bought my house (Florida, the pool is operational all year long) and the pool came with a built in LED lights, 5 in the pool and 1 in the spa. The lights were working fine and were all syncing and changing colors, following patterns etc . I did not have them on for a few...