Does anyone need this? It works fine, but I think the battery is going bad as it doesn’t hold a charge as long anymore.
If so and you’re in my area, I’ll stick it in the mailbox or I can ship it for postage if needed.
Thanks!
I’ve been lowering the PH using Pool Math and MA, just not enough to lower my TA.
I’m not sure what lowering PH in increments of 4 means? Does it have something to do with counting drops? It took 5 drops of R005 to get the PH to show up as ≈7.4 on the comparator. Pool Math suggested I add 73...
5/18/2023
TEMP 80
Crystal Clear Water
FC 9.6
CC 0
PH >8
TA 120
CH 310
CYA 60
NACL 3200 (2800 APP)
CSI 0.380
The comparator only goes up to 8 for PH, but sometimes I see other people reporting a PH higher than 8. Is there a math equation to get that number? I have a feeling it’s higher than 8...
Might be a silly question, but how does this work? I don’t see a desc on the website. I have come to enjoy testing, but eyeball leveling is my least favorite part.
Thanks!
Sorry, the pool man is here and I asked him about the screen, but I was wrong. He said it’s not showing up when the valves are changed using the toggle switches.
I am assuming the lights might be a different issue?
Yes, the pump is able to be controlled by the OnCommand. No problem. We were...
Thank you for merging the threads. I couldn’t find the other one to reply to it.
I’m sorry. I see now where I was confusing. That is my fault.
Yes it’s only the valves that are not working. When I use the toggle switch at the valves, it shows up on the OnCommand screen, but the OnCommand...
Yes. The OnCommand works to set schedules for pump run times, turns the pump on and off, the filter on and off, all of the buttons on it and the remote show to work for turning lights and off and on and for working the valves, but the actions don’t complete. The panel says it’s doing those...
Hey guys!
I am hoping for some help from the experts here with this issue.
The pool guy came out and installed the VSP, SWG, and filter. He told me he spent hours on the phone with Hayward tech support trying to figure out how to re-program the On Command, but he didn’t get the help he felt he...